Dist build issues

Support and discussion for Antumbra modules and DIY builds

Moderators: Kent, antumbra

Post Reply
gringz
Common Wiggler
Posts: 75
Joined: Sun May 08, 2016 8:11 pm
Location: France

Dist build issues

Post by gringz » Fri Mar 22, 2019 10:44 am

Hi there!
I tried building the dist as my first smd build and of course something is wrong..
to describe as best as I can how I it went :
I did everything with a soldering iron (I know I know i’ll Buy a hot air station as soon as possible),
Some resistors are 0805 In stand of 0604,
I didn’t ordered the C2 so I replaced it with a tht I had in stock
The dist lets audio through In bypass mode but nothing when activating the dist,
I switched the germanium diodes with red led after a friends advice,
I cleaned completely it with isopropanol,
I looked for shorts and fried components but all is well,
Here are some pics for you to see. I really need help at this point I don’t know what to do next
Attachments
1C06A9D4-92E8-449C-B9AF-263AC3F3E691.png
1C06A9D4-92E8-449C-B9AF-263AC3F3E691.png (4.2 MiB) Viewed 518 times
46266579-5EA4-4377-A35D-FA87379ECF7E.png
46266579-5EA4-4377-A35D-FA87379ECF7E.png (4.31 MiB) Viewed 517 times
10A27547-4049-4F17-A345-D5B7DF182E54.png
10A27547-4049-4F17-A345-D5B7DF182E54.png (4.37 MiB) Viewed 518 times

Post Reply

Return to “Antumbra”