Quad Transevent Generator Model 282e

Moderators: Kent, traffkin

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Sun Jul 26, 2020 4:50 am

good idea, i'll put it on the suggestion list, thanks!
architexture wrote:
Sat Jul 25, 2020 11:22 pm
Out of curiosity, what is the best way to erase all nodes in a section?

I don't want to clear the entire function, I just want to undo every point between say my third and fourth pulses (or any arbitrary portion of the function)

It feels that holding down the X encoder and turning should do this.

User avatar
architexture
Common Wiggler
Posts: 227
Joined: Fri Nov 30, 2018 2:59 pm
Location: Portland, OR

Re: Quad Transevent Generator Model 282e

Post by architexture » Wed Sep 16, 2020 8:45 pm

Oooh, I had another thought.

Would it be possible to add a euclidian style pulse generator into the module, so 1 pulse would basically divide the window in half, two would divide the window in thirds etc???

That addition would allow the 282e to behave as a timepiece as well as a soundscape generator.

:D Thanks again for making such amazing modules @traffkin !

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Thu Sep 17, 2020 7:42 am

it would be too obvious allusion to the 252e, wouldn't it? :)

i don't really like to make too much crossings with buchla modules... anyway, thanks for your ideas and suggestions!
architexture wrote:
Wed Sep 16, 2020 8:45 pm
Oooh, I had another thought.

Would it be possible to add a euclidian style pulse generator into the module, so 1 pulse would basically divide the window in half, two would divide the window in thirds etc???

That addition would allow the 282e to behave as a timepiece as well as a soundscape generator.

:D Thanks again for making such amazing modules @traffkin !

User avatar
architexture
Common Wiggler
Posts: 227
Joined: Fri Nov 30, 2018 2:59 pm
Location: Portland, OR

Re: Quad Transevent Generator Model 282e

Post by architexture » Thu Sep 17, 2020 3:42 pm

Oh yeah!!! Good point, thanks for hearing my ideas though :tu:

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Sun Jan 17, 2021 2:53 pm

firmware updated to v1.1.2

smoother cv outs, display can be temporarily turned off, some tiny bugfixes

manual is updated too

User avatar
deltaphoenix
Super Deluxe Wiggler
Posts: 1392
Joined: Sun Oct 14, 2012 6:41 pm
Location: Gainesville, FL

Re: Quad Transevent Generator Model 282e

Post by deltaphoenix » Sun Jan 17, 2021 3:19 pm

SWEET. Thanks, Alex!

User avatar
architexture
Common Wiggler
Posts: 227
Joined: Fri Nov 30, 2018 2:59 pm
Location: Portland, OR

Re: Quad Transevent Generator Model 282e

Post by architexture » Sun Jan 17, 2021 3:36 pm

@traffkin in the updated manual, you state that holding the X knob will turn off the display. That's a typo, holding the Y knob will disable the display

Thanks for the awesome update :D

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Sun Jan 17, 2021 4:16 pm

ahhmmm, sorry! :foul:

of course the Y knob

will update the manual right away
architexture wrote:
Sun Jan 17, 2021 3:36 pm
@traffkin in the updated manual, you state that holding the X knob will turn off the display. That's a typo, holding the Y knob will disable the display

Thanks for the awesome update :D

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Sun Jan 31, 2021 3:01 pm

another maintenance update, version 1.1.3

User avatar
Mannstrane
Learning to Wiggle
Posts: 45
Joined: Sat Dec 14, 2019 1:20 pm
Location: Los Angeles
Contact:

Re: Quad Transevent Generator Model 282e

Post by Mannstrane » Fri Feb 12, 2021 5:35 pm

Hello!

Is it possible to use 282e and 225e at same time? 225e doesn’t want to initiate with 282e.

225e never initializes with the 282e plugged in.

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Sat Feb 13, 2021 11:21 am

it is possible, of course

just try to change start-up time in the system menu
Mannstrane wrote:
Fri Feb 12, 2021 5:35 pm
Hello!

Is it possible to use 282e and 225e at same time? 225e doesn’t want to initiate with 282e.

225e never initializes with the 282e plugged in.

User avatar
momo
Ultra Wiggler
Posts: 944
Joined: Wed Jun 17, 2009 4:40 am
Location: London, England

Re: Quad Transevent Generator Model 282e

Post by momo » Mon Mar 01, 2021 1:52 pm

From the manual:

*hint* - The pulse line can be easily toggled from the overview
screen without having to dig into the editor - simply hold the
respective EDIT button to press the pulse grid.
When finished with editing, press an active EDIT button to
return to the overview screen.

Is this a yet to be implemented feature or am I doing something wrong?

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Mon Mar 01, 2021 2:10 pm

it is implemented
momo wrote:
Mon Mar 01, 2021 1:52 pm
From the manual:

*hint* - The pulse line can be easily toggled from the overview
screen without having to dig into the editor - simply hold the
respective EDIT button to press the pulse grid.
When finished with editing, press an active EDIT button to
return to the overview screen.

Is this a yet to be implemented feature or am I doing something wrong?

User avatar
momo
Ultra Wiggler
Posts: 944
Joined: Wed Jun 17, 2009 4:40 am
Location: London, England

Re: Quad Transevent Generator Model 282e

Post by momo » Mon Mar 01, 2021 6:58 pm

Ah! I have my screen in dark mode, and the difference is barely perceptible. But inverting the screen to light mode, the lines appear and disappear much more clearly - thanks.

dubstephead
Wiggling with Experience
Posts: 359
Joined: Wed Aug 31, 2016 9:43 pm
Location: Seattle

Re: Quad Transevent Generator Model 282e

Post by dubstephead » Tue Apr 06, 2021 7:39 pm

Is this still available?
traffkin wrote:
Sat Oct 20, 2018 3:21 pm
well, folks :)

without too many words, we did pretty big job and would like to present this powerful device which alludes to some Buchla function generation methods from 70s and 80s. and yes, IT INCLUDES THE 200e PRESET MANAGER

Image

the run is just 20 units

price is $1700 USD, worldwide shipping included

people who interested, please pm me


technical stuff:


282e_manual_en.pdf

keen_model_282e_v1.1.3.hex.zip

update_routine.pdf

User avatar
traffkin
Veteran Wiggler
Posts: 582
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Quad Transevent Generator Model 282e

Post by traffkin » Tue Apr 06, 2021 9:01 pm

pm me so i could put you on the list
dubstephead wrote:
Tue Apr 06, 2021 7:39 pm
Is this still available?
traffkin wrote:
Sat Oct 20, 2018 3:21 pm
well, folks :)

without too many words, we did pretty big job and would like to present this powerful device which alludes to some Buchla function generation methods from 70s and 80s. and yes, IT INCLUDES THE 200e PRESET MANAGER

Image

the run is just 20 units

price is $1700 USD, worldwide shipping included

people who interested, please pm me


technical stuff:


282e_manual_en.pdf

keen_model_282e_v1.1.3.hex.zip

update_routine.pdf

Post Reply

Return to “Keen Association”