"ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

PARATEK - aesthetics of the Soviet cyberpunk!

Moderators: Kent, Dedal

Post Reply
User avatar
Dedal
Common Wiggler
Posts: 234
Joined: Sun Mar 03, 2019 2:45 pm
Location: Russia

"ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

Post by Dedal » Wed Aug 05, 2020 11:57 am

• Adjustable number of channels from 1 to 6 + tremolo mode.
• Two-way operation, high switching speed limit.
• 6 algorithms for channels changing via trigger/gate, including random.
• Manual and CV* control also available.
• Unit save the last settings when powering off.
• And of course, the lovely tube indication of the active channel :)
• 6 hp skiff friendly (40mm deep)
*There may be rare minor layering of adjacent channels, this is a technical drawback of the Arduino ADC, we`ll try to completely eliminate it programmatically in future firmware, but for now this bug can occur at very slow and some borderline voltage values.

Module specs: 6 hp, skiff friendly, black or aluminium panels
иконки мастер 2 чатель алюм з.jpg
иконки мастер 2 чатель черный о.jpg


ModularGrid: https://www.modulargrid.net/e/paratek-% ... -aluminium
Insta: http://www.instagram.com/paratekorg/
PARATEK - aesthetics of the Soviet cyberpunk!
Grid: http://www.modulargrid.net/e/vendors/view/749
insta: http://www.instagram.com/paratekorg/

User avatar
parsec foley
Learning to Wiggle
Posts: 9
Joined: Wed Aug 28, 2019 5:50 am
Location: Milano

Re: "ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

Post by parsec foley » Thu Aug 27, 2020 8:18 am

from "only" beautiful to very useful, too! I was wondering if the output (or input) pair at the bottom were identical (and buffered?) and what's the purpose of the second input from top, on the left: is it for CV changing the direction/algorithms instead of manual changes via the button?

User avatar
Dedal
Common Wiggler
Posts: 234
Joined: Sun Mar 03, 2019 2:45 pm
Location: Russia

Re: "ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

Post by Dedal » Thu Aug 27, 2020 4:36 pm

parsec foley wrote:
Thu Aug 27, 2020 8:18 am
from "only" beautiful to very useful, too! I was wondering if the output (or input) pair at the bottom were identical (and buffered?) and what's the purpose of the second input from top, on the left: is it for CV changing the direction/algorithms instead of manual changes via the button?
Upper cv input for control Chanel’s instead of gate input, when is 0v - Chanel 1 when 5v higher Chanel (6 max)

Bottom outputs/inputs is normalled without buffer, but right got an optional Easter egg in last revision - gate control of algorithms :)
PARATEK - aesthetics of the Soviet cyberpunk!
Grid: http://www.modulargrid.net/e/vendors/view/749
insta: http://www.instagram.com/paratekorg/

User avatar
parsec foley
Learning to Wiggle
Posts: 9
Joined: Wed Aug 28, 2019 5:50 am
Location: Milano

Re: "ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

Post by parsec foley » Sat Nov 14, 2020 6:10 pm

Dedal wrote:
Thu Aug 27, 2020 4:36 pm
parsec foley wrote:
Thu Aug 27, 2020 8:18 am
from "only" beautiful to very useful, too! I was wondering if the output (or input) pair at the bottom were identical (and buffered?) and what's the purpose of the second input from top, on the left: is it for CV changing the direction/algorithms instead of manual changes via the button?
Upper cv input for control Chanel’s instead of gate input, when is 0v - Chanel 1 when 5v higher Chanel (6 max)

Bottom outputs/inputs is normalled without buffer, but right got an optional Easter egg in last revision - gate control of algorithms :)
(sorry for the delay) Thanks! guess I'm gonna need one... do you sell only via Reverb?

User avatar
Dedal
Common Wiggler
Posts: 234
Joined: Sun Mar 03, 2019 2:45 pm
Location: Russia

Re: "ЧАТЕЛЬ-6" - 6-channel bidirectional signal router.

Post by Dedal » Sun Nov 15, 2020 2:54 am

No , of course not, you can order directlyfrom me here or via email : djoxyjam@mail.ru
PARATEK - aesthetics of the Soviet cyberpunk!
Grid: http://www.modulargrid.net/e/vendors/view/749
insta: http://www.instagram.com/paratekorg/

Post Reply

Return to “PAratek”