.mix .knob .replacement

Discussion and support for STG Soundlabs modules of all formats.

Moderators: Kent, suitandtieguy

Post Reply
User avatar
proturboplus
Wiggling with Experience
Posts: 294
Joined: Sat Aug 27, 2011 6:24 am
Location: Hamburg

.mix .knob .replacement

Post by proturboplus » Sun Jan 19, 2014 11:16 am

Hi!

I like the .mix, but the colors of the knobs (eurorack) are not really my favorite ones. :hihi:

Can somebody give me the specs of these knobs in order to replace them?

I'm looking for something similar as these ones, which I have on my other eurorack modules:

http://www.smallbearelec.com/servlet/Detail?no=1192

Thanks!
Top
User avatar
mikecameron
Thread Killer
Posts: 977
Joined: Sat Nov 20, 2010 2:13 am
Location: Peoria, IL
Contact:
Contact mikecameron

Post by mikecameron » Sun Jan 19, 2014 10:27 pm

Those knobs you linked to are 5/8" which will fit, but will make it SUPER cramped with cables plugged in. The original knobs are DAVIES CLONES which are 1/2" in diameter. Any 1/2" knob will work, I wouldn't put anything bigger on it.
Top
User avatar
proturboplus
Wiggling with Experience
Posts: 294
Joined: Sat Aug 27, 2011 6:24 am
Location: Hamburg

Post by proturboplus » Mon Jan 20, 2014 7:55 am

Thanks for the info, so they have the same 6mm splined shaft as the doepfer ones?

(Just wondering, aren't there any black Davies clones?)
Top
User avatar
mikecameron
Thread Killer
Posts: 977
Joined: Sat Nov 20, 2010 2:13 am
Location: Peoria, IL
Contact:
Contact mikecameron

Post by mikecameron » Tue Jan 21, 2014 3:36 pm

there are, just a separate item number. depending on if you want the ABS plastic or the Phenolic. No splined shaft! You need knobs to fit 1/4" shafts w/set screw.

http://www.smallbearelec.com/servlet/Ca ... 7&total=74
Top
Post Reply

Return to “STG Soundlabs”