Input needed for the next DIY module to go on sale

Dedicated forum for the MMM synth modules, both production and DIY units.

Moderators: Kent, mmm

Post Reply
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Input needed for the next DIY module to go on sale

Post by mmm » Sat Feb 20, 2010 2:51 pm

The AES presentation is over, My two days of recovering from a head cold are over and the PCB place that should have had the Gate Delay boards to me yesterday received an earful from me and the boards will be here Monday. Squeeky wheel syndrome?

That leaves the open question...

What would you like to see for the next DIY module sale?

So far, the suggestions lean heavily toward the Amplitude Follower.
Which is a typical Envelope Follower. I just didn't think that the term Envelope follower is an accurate description of the function. One of my quirks, I guess.

Same deal on that as well. It was one of the last boards I designed and didn't get a lot of them so, I don't have the "full production" version with the solder mask and silk screen. If there's enough interest, I can have it done.

Suggestions?

:mmm:
Top
sandyb

Post by sandyb » Sat Feb 20, 2010 3:16 pm

Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower

oh shit - it was me that said it before wasn't it. :hihi:

:deadbanana:
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Sat Feb 20, 2010 4:04 pm

sandyb wrote:Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower
Amplitude Follower

oh shit - it was me that said it before wasn't it. :hihi:

:deadbanana:
LMAO,

Yup. Would you like an Amplitude Follower Sandy?

Hey, if you order all 10 of those, I can get the pretty PCB's made :banana:

:mmm:
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Sat Feb 20, 2010 4:14 pm

For those of you considering it,

I'll do the Amplitude Follower the same way I did the Gate Delay.

All the info is the same except the model and ordering part # is AF for Amplitude Follower instead of GD for Gate Delay. The 'B', 'K' and power cable preferences are still the same. Sale price is the same.
Just the circuit and parts are different.

I'll take pre-orders before I officially announce it on Tuesday. If we have enough, I'll order the full production boards. If not, function over form :)

:mmm:
Top
User avatar
Luka
Super Deluxe Wiggler
Posts: 5379
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka » Sat Feb 20, 2010 4:44 pm

can it have a pre amp in it to with some visual feedback of input and output voltages
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Sat Feb 20, 2010 5:41 pm

Luka wrote:can it have a pre amp in it to with some visual feedback of input and output voltages
Hi Luka.

I'm not quite sure I understand the question.

If you check out the main module description:
http://mmm.sevcom.com/wiki/index.php/Amplitude_Follower

The text describes the I/O functions.

There is a pre amp.
A red LED comes on when the signal level (post pre amp) reaches 5VDC.

What did you have in mind?

:mmm:
Top
sandyb

Post by sandyb » Sun Feb 21, 2010 1:29 pm

(pre) - ordered

:banana:
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Sun Feb 21, 2010 1:42 pm

sandyb wrote:(pre) - ordered

:banana:
Shore 'nuf did :hihi:

Any other takers?

:mmm:
Top
User avatar
ach_gott
Ultra Wiggler
Posts: 856
Joined: Tue Sep 02, 2008 2:47 pm
Location: Chicago

Post by ach_gott » Tue Feb 23, 2010 2:15 am

I'll be in for one. By pre-order do you mean just order it now or intention to order?
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Tue Feb 23, 2010 2:18 am

ach_gott wrote:I'll be in for one. By pre-order do you mean just order it now or intention to order?
Technically, the sale isn't official until tomorrow. But, I'll take orders now.
My focus right now is getting the Gate delays finished. They'll be done tomorrow morning.

:mmm:
Top
User avatar
Luka
Super Deluxe Wiggler
Posts: 5379
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka » Tue Feb 23, 2010 2:57 am

mmm wrote:
Luka wrote:can it have a pre amp in it to with some visual feedback of input and output voltages
Hi Luka.

I'm not quite sure I understand the question.

If you check out the main module description:
http://mmm.sevcom.com/wiki/index.php/Amplitude_Follower

The text describes the I/O functions.

There is a pre amp.
A red LED comes on when the signal level (post pre amp) reaches 5VDC.

What did you have in mind?

:mmm:

hehe, i guess you got that covered already
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Tue Feb 23, 2010 10:10 am

Luka wrote: hehe, i guess you got that covered already
Phew!

I thought I'd forgotten something, Luke. :bang:
Top
mmm
yummm!
Posts: 779
Joined: Mon Oct 27, 2008 7:45 pm
Location: Western Washington

Post by mmm » Wed Feb 24, 2010 1:48 am

It's official,

Starting now until midnight, March 03, I'd like to put the Amplitude Follower (Envelope Follower) on sale. But, I only have a couple of boards left unless we do the same routine, if there's enough interest and I get 10 orders, I'll have to order the boards (with the silkscreen and solder mask)

But, A couple of you can get the existing boards right away. They just don't have the solder mask and silkscreen. Not really an issue if it's mounted behind a panel in a cabinet 8_)

Same prices and info as the Gate Delay:
AF1B= Amplitude Follower assembled/tested board only= $64.95
AF1K= Above board with the WK-10A wire kit and power cable of choice=$80.95
To specify which power cable you'd prefer, suffix the AF1K with a -6(6P-6P power cable), -4(4P-4P power cable) or a -E (4P-Euro power cable)

So, the full kit with a 4-pin to Euro-style power connector would be:
AF1K-E

Once again. This is a MW-only offer so, you'll have to PayPal me direct to my PayPal account:
mattsonminimodular(at)comcast.net (at)=@

Please don't use my shopping cart, it won't reflect the sale price and shipping charges correctly.

US shipping add $4.95 for up to every four boards.
Everywhere else, add $13.50 for up to every four boards.

If you missed out on the previous sales, I'll honor those until March 03 as well. Put me to work :hihi:

I didn't get to the Post office before they closed but, all of the remaining orders are ready to send in the morning. :yay:

Thanks guys,
:mmm:
Top
Post Reply

Return to “Mattson Mini Modular”