Help! midiDAC stopped working

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
eljay
Common Wiggler
Posts: 123
Joined: Sun Jan 10, 2016 4:50 pm
Location: Bransgore, UK

Help! midiDAC stopped working

Post by eljay » Thu Jan 14, 2016 11:49 am

I've just moved my midiDAC module in my rack, all power was off when I moved it. Now that I've powered everything back up and tested it I find there is no PITCH output from the midiDAC. I get a GATE signal output and the gate and legato LEDs light when playing the midi keyboard but no PITCH CV from either the front panel socket or the Oakley BUSS. It has all been working perfectly for a couple of months - what have I done?

There seems to be about 13.5V all the time on each of these output sockets, Velocity, Modulation, Aftertouch, Bender, CC.

eljay
Common Wiggler
Posts: 123
Joined: Sun Jan 10, 2016 4:50 pm
Location: Bransgore, UK

Post by eljay » Thu Jan 14, 2016 12:27 pm

I think I've found the problem, a fault with the power supply cable from the dizzy to the module, the -15v supply line appears faulty. I've swapped a supply lead from another module and all is well.

Post Reply

Return to “Oakley Sound Systems”