MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

nonlinearcircuits NLC panel templates
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author nonlinearcircuits NLC panel templates
andrewF
See this thread for NLC Mouser carts

Put your panel templates in this thread if you want to share. I will also post drill templates for various modules.

note - always check the panel template matches your PCB before drilling.

edit (13/3/2016): It seems there is a 10 attachment per post limit, so scroll down for more panel files in other posts


triple sloth panel

4HP single sloth panel

Multiband Distortion Processor panel

cellf action panel

cellf action panel (with reference points)

wamod mixer panel

eurorack Neuron panel

Brain Custard panel
MatrixModulator
Hi Andrew,

I was wondering where are all the other template files for NLC modules. I don't see them on NLC website.

Thanks
magneticstripper
Is there a drill layout for Collude?
MatrixModulator
Oh i just though... are thoses pictures from your facebook can be used as templates for panels or they are not used for that?

andrewF
magneticstripper wrote:
Is there a drill layout for Collude?

I will process a batch of various modules today and add them to the 1st post
andrewF
MatrixModulator wrote:
Oh i just though... are thoses pictures from your facebook can be used as templates for panels or they are not used for that?



These are the outputs of a gerber viewer, so maybe not 1:1 scale when you print them out (tbh I haven't tried tho)
I will get the 1050 template up today (and B0N0 & 329)
falafelbiels
the illustrator file that I used to cut my Delaynomore panel
flab
i think we have to put those templates and the mouser carts we have in the other thread together , all the NLC resources together.

i have few panel .dwg I will upload them when I will find some time!
andrewF
templates for the giant B0N0, 329Phase, FK1T and 1050mixSeq added to the 1st post
TimoRozendal


and here is the svg and a photo of my jerkoff panel
andrewF
Thanks Timo

panel templates for DelayNoMore, Triad, dual LFO, BOOLs & 4seq added to 1st post
edwinm
Thanks for the bools!
MatrixModulator
Thanks for all theses panel templates, i just realised you posted them hehe.
Thanks MY ASS IS BLEEDING
MatrixModulator
Does theses panel templates are on your website or somewhere else?

- Chopper
- Flip Flop Chaos
- Vactrol Pill

I don't need them right now, no stress hehe!
Thanks smile
andrewF
MatrixModulator wrote:
Does theses panel templates are on your website or somewhere else?

- Chopper
- Flip Flop Chaos
- Vactrol Pill

I don't need them right now, no stress hehe!
Thanks smile


Chopper is in 1st post, the rest will go here as the 1st post is 'full'
MatrixModulator
Thanks !!! MY ASS IS BLEEDING
Crashlander42
Here's my Multiband distortion panel.

andrewF
love love NICE panel!
EarlJemmings
Is the panel for the Squid Axon available? Want to look into making a combined squid axon/brain custard panel
andrewF
Sorry I don't have my regular pooter here, so cannot access the final version files. Will upload when I get to it.
Crashlander42
Is there a divine CMOS template?
andrewF
Crashlander42 wrote:
Is there a divine CMOS template?

From the bad old days of FPD, here you go:
andrewF
EarlJemmings wrote:
Is the panel for the Squid Axon available? Want to look into making a combined squid axon/brain custard panel


Sorry just noticed i never posted the Squid Axon template d'oh!
Here it is:
Crashlander42
Thanks!
Crashlander42
The there a panel template for baDumTiss?
andrewF
I can make one but can't access my work pooter until Jan24...so please wait a week Hug

on tour!
Crashlander42
I think this works -



I just took the image of your panel, laid it under my 8hp template, and Traced it. hihi hihi Looks like it lines up. I'll report back when I finish populating it.

Good luck on tour!
sbmani
ANDREWF - if we make custom panels do you want us to put NLC's logo on it or write nonlinearcircuits somewhere? even if these are for our own personal use i.e. not for sale?
andrewF
if it is personal use, you can and should do whatever you like.......... put a Moog logo on there if you want

If for selling, which is totally cool btw, I'd appreciate either the logo, NLC or nonlinearcircuits on there somewhere.
s'mores
anyone got numberwang and 32:1? thanks!
andrewF
s'mores wrote:
anyone got numberwang and 32:1? thanks!

numberwang panel template

i'll get 32:1 up later today
s'mores
sweeeet

for anyone wondering, the surface mount bits aren't too difficult to solder by hand with some patience

[/img]

andrewF wrote:
s'mores wrote:
anyone got numberwang and 32:1? thanks!

numberwang panel template

i'll get 32:1 up later today
andrewF
andrewF wrote:
s'mores wrote:
anyone got numberwang and 32:1? thanks!

numberwang panel template

i'll get 32:1 up later today


or tomorrow....
s'mores
Hey Andrew, can we get the Feague and Segue templates? Thanks as always
s'mores
oh yeah and I almost forgot, bong0 too!
Larrea
Are these what you're looking for? Two of the three anyway.
s'mores
Larrea wrote:
Are these what you're looking for? Two of the three anyway.


Perfect, thanks!
Crashlander42
Is there an 8-bit cipher template?
andrewF
Crashlander42 wrote:
Is there an 8-bit cipher template?


HERE!
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 2
Powered by phpBB © phpBB Group