Eurorack: better mallets with Rings

Post your patches here! Put the format(s) in the subject.

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
User avatar
starthief
Super Deluxe Wiggler
Posts: 3961
Joined: Tue Oct 04, 2016 10:39 am
Location: St Louis, MO
Contact:

Eurorack: better mallets with Rings

Post by starthief » Sun Apr 28, 2019 12:54 pm

Using the built-in exciter in Rings is... okay, but doesn't really sound like a nice xylophone/glockenspiel. This does, more or less:

Image

Set up Rings in 4x polyphony (red LED) and modal mode (green). Tune frequency to about 12 o'clock, or possibly an octave up around 2; Structure at about 2, Brightness at about 1, Damping and Position about 12 o'clock.

Set up a triangle VCO with V/OCT controlled by keyboard, tuned about 2-3 octaves below Rings. Modulate the VCO frequency with a fast decay envelope (adjust the amount and rate to taste). Use a slower, but still fast-ish decay envelope for the VCA.

Run that into Rings' audio input and mult the same V/OCT into it.

Adjust everything to taste (particularly the pitch envelope amount/speed, Brightness and position). You may also want to mult V/OCT into the Brightness CV input and set the attenuverter negative, so that higher notes are not quite as piercing.

You can probably use a kick drum module in place of the triangle VCO. :mrgreen:

Audio:
http://starthief.net/stuff/rings_glockenspiel.wav

For comparison, here's how it sounds disconnecting the input to Rings and just using the default exciter:
http://starthief.net/stuff/rings_plain.wav


Hammered dulcimer variation:

Use a square VCO. Set Rings to sympathetic strings mode (yellow LED), Structure to 9 o'clock, Brightness 3 o'clock or higher, and Position about 3 o'clock. Give the pitch envelope just a taste of attack time. Plenty of stuff you can adjust about this too.

Audio:
http://starthief.net/stuff/hammered.wav
If FM overkill is wrong, I don't want to be right. ★ starthief.bandcamp.comstarthief.netModularGrid

User avatar
j_dowe
Wiggling with Experience
Posts: 270
Joined: Mon Aug 08, 2016 4:02 pm
Location: blono, il

Post by j_dowe » Mon May 06, 2019 9:38 am

love the glockenspiel. i don't have this set up, but w/ the patch & tweak diagram and your notes i fully grasp it.

:yay:

User avatar
Heliophile
Common Wiggler
Posts: 231
Joined: Sun Jun 01, 2014 2:39 pm
Location: The Netherlands

Post by Heliophile » Wed May 22, 2019 4:13 pm

This is great, thanks for sharing!
Heliophile - synthpop
http://heliophile.bandcamp.com/

Zube
Wiggling with Experience
Posts: 413
Joined: Wed Jul 01, 2015 11:25 am
Location: Spain

Post by Zube » Sun May 26, 2019 3:15 am

Awesome! Thanks for posting this. Love this new section

cg_funk
Wiggling with Experience
Posts: 494
Joined: Wed May 23, 2018 12:56 am

Post by cg_funk » Mon Jun 10, 2019 1:45 pm

This was cool to try.

I've been doing a similar trick with my guitar into Rings:

I put the guitar through an envelope follower.
Then I take the envelope and use that to open a VCA that sends the guitar to Rings. Set the VCA to slightly exponential, and just the plucking transients get sent to Rings input.

It's a trick I learned from Patch&Tweak called Peak Processing (p246).

bibleblack
Learning to Wiggle
Posts: 34
Joined: Mon Feb 12, 2018 1:34 pm

Post by bibleblack » Thu Aug 08, 2019 4:34 am

Now just need to finish work so i can play

Post Reply

Return to “Synthesis Techniques”