Akai S950 with IB-105

Any music gear discussions that don't fit into one of the other forums.

Moderators: Joe., luketeaford, lisa, Kent

Post Reply
User avatar
Elephantbud
Common Wiggler
Posts: 150
Joined: Tue Aug 13, 2013 3:23 pm
Location: Portugal

Akai S950 with IB-105

Post by Elephantbud » Wed Feb 22, 2017 3:49 am

I just installed a IB-105 in my s950.
When I try to sample with the coaxial digital input, I d'ont see or hear incoming signal.
I set up start with: audio level (3) and get the message
'waiting for digital leader'

Or the IB-105 does not work, or I did not install it correctly? :bang:

Any one here still use this ancient piece of gear?

User avatar
Elephantbud
Common Wiggler
Posts: 150
Joined: Tue Aug 13, 2013 3:23 pm
Location: Portugal

Post by Elephantbud » Wed Feb 22, 2017 2:21 pm

IB-109 needs OS1.2A to work, but I can't find the IB-105 manual.
So maybe that is the problem, my s950 runs on 1.2.

Anyone here knows where I can find the latest version of the OS?

Licudi
Ultra Wiggler
Posts: 876
Joined: Sat Jan 16, 2016 12:43 pm

Post by Licudi » Wed Sep 11, 2019 11:47 am

No point opening a new thread for this, but has anyone here managed to get the -105 working with GigaFile?

thekernel
Common Wiggler
Posts: 75
Joined: Wed Aug 18, 2010 7:44 am

Post by thekernel » Fri Dec 20, 2019 4:43 pm

Licudi wrote:No point opening a new thread for this, but has anyone here managed to get the -105 working with GigaFile?

I'm currently using GigiFile with Sandisk and Kingston 4G SDHC cards attached to a fully expanded S950 (1.2 O.S.) via the IB-105 interface.

To install these cards on the Gigafile, go to:

DISK (ensuring a floppy is in the drive)

Page 9: format sh204/5

hit 'Enter'

A 4g card will show up as = 2934% on full expanded S950

Then go to go to Page 1: select, create floppy

Put the curser on 'floppy' on the top line , press ‘Letter’ and name the volume. Press enter when done.

Repeat for other volumes…

Post Reply

Return to “General Gear”