DIY disting TRS breakout midi module question

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
seta666
Common Wiggler
Posts: 248
Joined: Fri Apr 19, 2019 5:15 am

DIY disting TRS breakout midi module question

Post by seta666 » Fri Mar 13, 2020 11:28 am

I would like to make something like this

https://www.muffwiggler.com/forum/viewt ... 5&t=212573

The official DIY version is cheap but I have no room for it, so I would like to add 2 TRS In/out to the plate holding my SQ-1, also I find TRS jacks less invassive than full size DIN sockets.

So, Do I just need to wire Disting´s Pin 1/2 for midi out and pins 3/4 for midi In? that simple?

User avatar
bcomnes
Common Wiggler
Posts: 221
Joined: Tue Jan 06, 2009 3:51 pm
Location: Portland OR

Re: DIY disting TRS breakout midi module question

Post by bcomnes » Fri Mar 13, 2020 11:59 am

I put a DIN Jack on the side of my synthrotek lunchbox, and yes that wiring is that simple, works great ,0hp
~~~~~~~~~~~~~~~~~~

Too Loud?

Too Bad
~~~~~~~~~~~~~~~~~~

seta666
Common Wiggler
Posts: 248
Joined: Fri Apr 19, 2019 5:15 am

Re: DIY disting TRS breakout midi module question

Post by seta666 » Fri Mar 13, 2020 4:28 pm

bcomnes wrote:
Fri Mar 13, 2020 11:59 am
I put a DIN Jack on the side of my synthrotek lunchbox, and yes that wiring is that simple, works great ,0hp
Thanks ;)

Post Reply

Return to “Expert Sleepers”