Sequencers for D-1000 or D-2000

A place to discuss the brutal yellow evil we all love so much.

Moderators: Kent, metasonix

User avatar
EPTC
Super Deluxe Wiggler
Posts: 1308
Joined: Thu May 14, 2015 9:01 am
Location: Austin TX
Contact:

Post by EPTC » Mon Jun 10, 2019 1:13 pm

ExtrasensoryPerception wrote:Bummer...

I came here to search for this exact piece of information... would have loved to add cv control aside from triggers with a faceplate mounted module.
Heya - Let me amend that (a couple years later) to say you can likely remove the front plate of Pam's, position the module in the faceplate slot from behind (make your jokes), and then screw the faceplate of Pam's on top.

Haven't tried this but this is how I got the RK5 LPG to fit in the open section of the faceplate. That's a really nice use of the open space, too.
Weekly show: SPOKEN WORD WITH ELECTRONICS, http://www.ep.tc/spoken-word

This week's episode is on noise and fixed filter bank sound design for Eraserhead and 2001, A Space Odyssey:


User avatar
Harko
Learning to Wiggle
Posts: 4
Joined: Tue Aug 07, 2018 11:41 pm
Location: Italy

Post by Harko » Thu Jul 11, 2019 8:48 am

I'm temporarily using a RCD with the Korg SQ-1 for sequencing the D-2000.
The SQ-1's sync output pulse seems to be working fairly good.

User avatar
lud
Super Deluxe Wiggler
Posts: 1145
Joined: Tue May 05, 2015 2:02 pm
Location: UK

Re: Sequencers for D-1000 or D-2000

Post by lud » Sun Apr 12, 2020 7:51 am

Intellijel steppy works really well with the D1000, apart from being slightly fiddly - variable gate length, 4 channels, up to 64 steps. But needs a clock so not so good for the D2000 I guess (I use clock out from D1000)

User avatar
NightGoat
Common Wiggler
Posts: 66
Joined: Mon Mar 20, 2017 4:12 pm
Location: London UK

Re: Sequencers for D-1000 or D-2000

Post by NightGoat » Thu May 28, 2020 7:47 pm

For my RK4 and RK1 I use Grids and MFB SEQ-03 which both work well as does turing machine pulses.
Tempi does not work due to gate length but I get round this with a Ladik U030 gate to trigger converter

Post Reply

Return to “Metasonix”