MUFF WIGGLER Forum Index
 FAQ & Terms Of UseFAQ & Terms Of Use   Wiggler RadioWiggler Radio   SearchSearch   Muff Wiggler Blog & NewsBlog & News   Muff Wiggler StoreMW Store 
 RegisterSign up   Log inLog in 

VBrazil Systems - Aether System One
MUFF WIGGLER Forum Index -> Modular Synth General Discussion Goto page Previous  1, 2, 3 [all]
Author VBrazil Systems - Aether System One

pointsource

BAND PASS FILTER OUTPUT:

[s]http://soundcloud.com/point-source/statevariablevcf-band-pass[/s]


pointsource

MORE STATE VARIABLE FILTER:

[s]http://soundcloud.com/point-source/statevariablevcf-3[/s]

Aether Pulse output into State Variable VCF.

1st : LPF + ADSR + LFO

2nd: LPF's cutoff being sweeped by LFO

3rd: BPF's cutoff being sweeped by LFO

4th: HPF's cutoff being sweeped by LFO

5th: BPF + ADSR + PWM modulated by LFO


pointsource

RING MODULATOR: hyper

[s]http://soundcloud.com/point-source/ring-modulator[/s]


1st segment:

Two Aether OSC outputing triangle waves into ring modulator. Random notes played in the keyboard, with some OSC freq knob tweaking.

2nd segment:

Aether oscillators being modulated by their own LFO's and fed into Ring Modulator


lightworks

Muito bom!
O Lizard parece ser incrivel!
Parabéns malta!


smetak

Grato pelo elogio - agora é rezar para o Vinicius terminar isso tudo o quanto antes.

O Lizard é paulada - é uma espécie de "sequeciador" (apesar de, no fundo, não ser um; tanto assim, que há um sequenciador de 32 steps em separado) que faz variações contínuas em cada sequência. É, realmente, muito interessante - criação única do Vinicius.

Agora, é rezar para que eu e o "pointsource" meta logo as mãos nisso - a espera está nos matando!


lombrose

Soooooo, is there a video already? hmmm.....

Have been talking with Vinicius and can´t wait to put my hands on one of his osc.

I asked him about the hybrid thing with the osc and he told me that the sound generated by the aether one doesn`t pass through digital path. the digital part is just to control the tune stability.

He told me that the aether osc will track 10 octaves with no noticeable drift. SlayerBadger!

And to make me more anxious, sent me today pdf manuals for the monsterdrone, Lizard and Multi LFO. MY ASS IS BLEEDING


smetak

Hum....video...yes. No doubt, there will be a video.

Hopefully, we'll get a video together for Youtube, ect. soon. I'm planning to have a video shot with my system, which will contain a few modules from other manufacturers (Doepfer, Make Noise, Tip Top, ES, etc.) as comparison with what he's doing.

But the video might take a while. He's furiously working, adding the final touches, to PointSource's system - because this is the first one, its taking a tad longer than expected; it should be finished and ready to ship in about a week or two.

With this done, I believe it will be faster for all future orders and, who knows, a video sooner than later.


lombrose

smetak wrote:
Hum....video...yes. No doubt, there will be a video.

Hopefully, we'll get a video together for Youtube, ect. soon. I'm planning to have a video shot with my system, which will contain a few modules from other manufacturers (Doepfer, Make Noise, Tip Top, ES, etc.) as comparison with what he's doing.

But the video might take a while. He's furiously working, adding the final touches, to PointSource's system - because this is the first one, its taking a tad longer than expected; it should be finished and ready to ship in about a week or two.

With this done, I believe it will be faster for all future orders and, who knows, a video sooner than later.


Hummmm, hope he finish it soon, I´m about to pull the trigger on a osc, and like what he showed me, the problem is that the gas level is increasing, I´m trying to resist but it´s becoming harder, rs help

Search for Mrlombrose on youtube and you`ll see a couple videos I did with my little system. Guinness ftw!


smetak

I believe it won't take long for getting an oscillator from Vinicius - the PCBs are all up and ready, with the panels all nice and printed. The mounting is extremely quick, no big deal, just some screws and knobs and there, ready to go. I, myself, have been to his studio many times and have seen everything stacked and ready to for mounting.

Once Pointsource's system is completed, he'll probably be able to ship any of the several modules he has designed in very short time.

I'm to drop him a line, later in the day, and ask when he will be able to ship the modules.

I'll keep you posted on this. cheers, w.


lombrose

Guinness ftw!


smetak

Guess you already spoke to him? But if not, I dropped him a line earlier today, while procrastinating at work.

He had a bit of a set back on something he's developing for another project, to another job he's doing, which was a bit urgent, but said he'll be finishing PS's system sometime next week.

I told him that before he starts on my system, he could patch up an oscillator or two and send it your way. He said he still can mount two extra Aethers before having to order more PCBs.

Thus, you'll probably have something in your hands before I do! Lucky!


lombrose

That`s good news!!!!

w00t


matttech

wow eek!


pointsource

Smetak, Lombrose, sorry for taking so long to reply, but I'm so busy lately that I haven't had the time to sit and write something.

I just got the pic of my system and tears came to my eyes lol




On the bottom there's room for an ES-3, ES-5 and four gate expanders.


smetak

pointsource wrote:
Smetak, Lombrose, sorry for taking so long to reply, but I'm so busy lately that I haven't had the time to sit and write something.



Muito mandado a cumprir, né? Hehehehe. Parabéns pelo sistema! Paulada!

Com isso, chegou, finalmente!, a minha vez!


pointsource

smetak wrote:
pointsource wrote:
Smetak, Lombrose, sorry for taking so long to reply, but I'm so busy lately that I haven't had the time to sit and write something.



Muito mandado a cumprir, né? Hehehehe. Parabéns pelo sistema! Paulada!

Com isso, chegou, finalmente!, a minha vez!



Too many!!!

Some more pics:










pointsource

Cabinet rear view, with ventilation, voltage selector, power switch and fuse:




pointsource

YEssssssssssss!!!

It's finally here!! IT exists, it's not a dream!! LOL

Can't believe it... After long 7 months waiting, my baby arrived!!

I'll be messing with it today and tomorrow, I belive that sunday I'll be uploading the first video, a brief introduction to the system and the first video demo of the oscillators in action, all in full HD, and I'll be recording in high sample rate for best fidelity and upload the wav files, no effects will be applied.

I'll try my best to showcase all the parameters of all modules, if you have any sugestions or a certain setup (patch) you want me to do, feel free to contact me.

I'll be opening a new thread for the videos.

Stay tuned!


pointsource

Hi!

I just wanted to say that I'm having the greatest time ever here with the modular system!!! I'm really impressed with the sound and build quality of the modules! I was able to get some really cool sounds out of it without applying any effects.

Tomorrow morning I'm gonna start recording!

First video: The Aether Oscillators

And I think I'm gonna have to order more patch cables lol, I have a lot of cables here but most of them are longer than I thought I would need.


I'm addicted to this thing, I haven't slept properly last night and today I spent almost the whole day in front of the system, my neck, back and arms hurts! Patching is really fun, but also makes you get tired quick! I guess I'll have to go to the gym everyday now instead of 3x a weel lol


smetak

So, where are the sounds?!?!?!?!

Very anxious!!!!! Very anxious indeed!!!!


pointsource

Hi!!

The video is ready and uploading! But it's damned big! Almost 3GB, it's been 3 or 4 hours since I started uploading it to youtube, it's at 30% now... I guess I'll have to leave it on all night long.

I recorded to my daw the audio that I've put over the video, I'll be uploading the WAV files tomorrow for you guys to download.


smetak

Parfait!


pointsource

I have opened a new thread, I posted the video at the Eurorack Modules section of the forum. thumbs up

MUFF WIGGLER Forum Index -> Modular Synth General Discussion Goto page Previous  1, 2, 3 [all]
Page 3 of 3
Powered by phpBB © phpBB Group