MUFF WIGGLER Forum Index
 FAQ & Terms Of UseFAQ & Terms Of Use   Wiggler RadioWiggler Radio   SearchSearch   Muff Wiggler Blog & NewsBlog & News   Muff Wiggler StoreMW Store 
 RegisterSign up   Log inLog in 

Jones O'Tool Oscilloscope module
MUFF WIGGLER Forum Index -> Eurorack Modules Goto page Previous  1, 2, 3, 4, 5 ... 31, 32, 33  Next [all]
Author Jones O'Tool Oscilloscope module

chvad









have i mentioned that i m ready to buy this? screaming goo yo
 

itijik









Take my money, please. I am ready too thumbs up
 

chvad










WE ARE READY.
 

Monobass









you're not going to tease us with say... .the refresh rate of the VU meter? hyper
 

daverj









Monobass wrote:
you're not going to tease us with say... .the refresh rate of the VU meter? hyper


The VU/Peak meter screen refreshes at about 15Hz.

The VU meter follows the industry standard 300 ms damping standard, while the peak meter follows the standard 5 ms response.

That means that if you feed in a 1 Khz sine wave modulated at 300 ms on and 300 ms off, the VU will glide from the bottom to the 0db point and back, while the peak side will flash between full scale and off. And if you feed in a 1Khz sine modulated at 5 ms on and 5 ms off, the VU will show a reduced constant level (I forget what it was, maybe -5db with a small flicker at the top) while the peak side shows a constant full scale.

Both scales were calibrated against a 5 digit digital RMS audio level meter.

I'll feed some music into it when I make the demo video. SlayerBadger!
 

Votek_Mendo









today? love
 

Monobass









15hz sounds very usable thumbs up

daverj wrote:
Both scales were calibrated against a 5 digit digital RMS audio level meter.


love please mister take my money
 

synthomaniac









That looks like a winner to me especially with the CV tool modes love

Good luck
Tony
 

synthomaniac









radiodread87 wrote:
Oh Dave thats awesome!!!!!!!! love the name too sounds very Irish grin


Jones? hihi
 

radiodread87









synthomaniac wrote:
radiodread87 wrote:
Oh Dave thats awesome!!!!!!!! love the name too sounds very Irish grin


Jones? hihi


no O'tool lol wink
 

Kalerne









Hello ! Any news about this module ?
 

sinemod









+ one for the tuner mode.
You know the limit of your product ...
 

daverj









Sorry I've been quiet for the past week. I've been busy getting quotes from SMT assembly houses for doing the production run, and been struggling trying to find thin clear anti-static acrylic to use as a window over the LCD.

I finally had to have the anti-static plastic custom made, since it doesn't come in 1/16" as a standard item.

I'll try to post a video this week.
 

deastman









Really looking forward to this!
 

Khyber Pass









I had noe idea I wanted something like this. cry

8_)
 

Banalism









Looking forward to the video...
 

CursedFrogurt









Most excellent.
 

RichyHo









I'm late to the party on this one, but it looks fantastic. When/where will they be for sale?
 

READYdot









How does the O'Tool compare to this http://www.addacsystem.com/product/addac200-series/addac205-dual-oscil loscope-awg?
 

daverj









Here's the difference in screen size between the screen used in mine vs Xprotolab and Addac. (mine is the color one)


 

toppobrillo









nice! looking forward to these..
 

READYdot









daverj wrote:
Here's the difference in screen size between the screen used in mine vs Xprotolab and Addac. (mine is the color one)



Well that is some difference. So that means that the O'Tool is a mostly selfmade tool, as opposed to the Xprotolab being a commercial product used in a module? Do you know how the refresh-rate of the Xprotolab is compared to yours? I'm a noob in these things, so I'm really struggling in imagining with how this will look!?
 

daverj









The O'Tool is 100% original hardware and software design by me. (with some feedback along the way from a friend who has used a lot of scopes)

I've never used an Xprotolab, so can't say how the refresh compares. When I make the video, you can compare the videos.
 

kjellb









I saw the prototype when visiting. Great little thing. Looking forward to both this and the video stuff coming out.
 

READYdot









daverj wrote:
The O'Tool is 100% original hardware and software design by me. (with some feedback along the way from a friend who has used a lot of scopes)

I've never used an Xprotolab, so can't say how the refresh compares. When I make the video, you can compare the videos.


Ok, thnx! Can't wait. SlayerBadger!
 
MUFF WIGGLER Forum Index -> Eurorack Modules Goto page Previous  1, 2, 3, 4, 5 ... 31, 32, 33  Next [all]
Page 4 of 33
Powered by phpBB © phpBB Group