Getting an external pulse into the Easel?

Discussing some incredible modules that don't quite fit into the other forum categories.

Moderators: Kent, Joe., analogdigital, infradead, lisa, parasitk, plord

User avatar
rayce
Veteran Wiggler
Posts: 578
Joined: Wed Sep 01, 2010 7:02 pm
Location: Colorado
Contact:

Post by rayce » Sun Oct 25, 2015 8:37 pm

Is there a way to do this with the iProgram card? Maybe a hidden virtual jack in the app to control pulser trigger?

_lex
Common Wiggler
Posts: 77
Joined: Sat Nov 10, 2012 7:07 pm
Location: PDX/OR/USA

Post by _lex » Fri Nov 13, 2015 12:23 pm

vgermuse wrote:
_lex wrote:thanks todd!
Hey Lex,

Cool. My pleasure. Happy exploring :party:
just got my keyboard and i have been exploring the program card (based on your example) to route pulses (added some banana jacks). interesting thing is that my 208r will not take a gate from any of my eurorack gear, but when i route it thru the card it works even with 5v!

one cool thing about the keyboard is that in mono/arp mode the additional gates act like a clock divider. you can send them directly to different inputs (like LPG level) to get more variety..

my next experiment is to see if i can run a banana in to the card for different modules and keep different pulses isolated. currently i have my keyboard gate going to the pulser and a clock going to keyboard. i hope that the keyboard section is isolated by module so that i can send one pulse to the pulser, one pulse to the sequencer, and a third pulse to the envelope.


Image
vgermuse wrote:
_lex wrote:thanks todd!
Hey Lex,

Cool. My pleasure. Happy exploring :party:

User avatar
Cobramatic
Wiggling with Experience
Posts: 464
Joined: Sat Sep 21, 2013 6:45 pm
Location: Sydney

Post by Cobramatic » Sat Nov 14, 2015 7:43 pm

_lex wrote: my next experiment is to see if i can run a banana in to the card for different modules and keep different pulses isolated. currently i have my keyboard gate going to the pulser and a clock going to keyboard. i hope that the keyboard section is isolated by module so that i can send one pulse to the pulser, one pulse to the sequencer, and a third pulse to the envelope.
You can definately put separate pulses into each section of the Program card, and each will be independent - Sequencer step pulse in, EG, Pulser and random CV step geneneration. I can also confirm they work with Eurorack 5v triggers and gates ( which is really handy!)
You can simultaneously use the Main Pulse in on the 208. Just be careful where the switch settings are for each so you can use them seperarately or added together in 'both' mode. The main pulse-in only works with 10v pulses ( not 5v standard eurorack)
I took advantage of all of this for my Easel Mega Meta break-out-box in my thread from last week. You can see a demo video there too.

Post Reply

Return to “Buchla, EMS & Serge”