Author |
Serge Cases? |
br>3001 |
br>Hey, anyone know anyone who is making cases that look purty for Serge modules?
I really love the way Serge sounds, but I think they can be ugly as sin.
what are people doing for DIY? I think I saw a good one, was it phisynth that has those sweet metal sides? br> br> |
|
br>30ohm |
br>Goike has made some custom cases for Serge that look amazing. Lots of stuff out there. I'd scope out the banana porn thread that's sticky'ed. br> br> |
|
br>phisynth |
br>oops, yes I forgot to reply to your PM, sorry (busy days)
yes I had some aluminium cheeks made, based on the BugBrand bomber cheeks, but modified for 3x or 4x 4U, they look like this :
Very happy with the ergonomics.
I can and you the dwg files if you want (I have the 3 and 4 panel version) but all the dimensions are in mm. Shouldn't be a problem if you convert these with a CAD program though.
Ph br> br> |
|
br>djangosfire |
br>@phisynth...... STUNNING setup
br> br> |
|
br>3001 |
br> phisynth wrote: | oops, yes I forgot to reply to your PM, sorry (busy days)
yes I had some aluminium cheeks made, based on the BugBrand bomber cheeks, but modified for 3x or 4x 4U, they look like this :
Very happy with the ergonomics.
I can and you the dwg files if you want (I have the 3 and 4 panel version) but all the dimensions are in mm. Shouldn't be a problem if you convert these with a CAD program though.
Ph |
Sweet please do! I think I'll get the 3 panel one done, I've got 5 panels that could use a spot. :-) br> br> |
|
br>modintx |
br>These...look...amazing!! br> br> |
|
br>nathanxl |
br>Ive made a few for wigglers.
br> br> |
|
br>wavecircle |
br> phisynth wrote: | oops, yes I forgot to reply to your PM, sorry (busy days)
yes I had some aluminium cheeks made, based on the BugBrand bomber cheeks, but modified for 3x or 4x 4U, they look like this :
Very happy with the ergonomics.
I can and you the dwg files if you want (I have the 3 and 4 panel version) but all the dimensions are in mm. Shouldn't be a problem if you convert these with a CAD program though.
Ph |
Fuck the Serge, Banana Coco!!!! br> br> |
|
br>microtonal |
br>Would you mind explaining where or how you had the large aluminum side panels made? br> br> |
|
br>widdly |
br>I'm using a 12U mixer case for my DIY. I can travel with it patched if I don't stack too high. br> br> |
|
br>phisynth |
br> microtonal wrote: | Would you mind explaining where or how you had the large aluminum side panels made? |
Sure, it's a design I made based on Tom Bugs bomber cheeks. He was kind enough to send me his technical file, I adapted it for 4U, then sent the .DWG file it to a local metal workshop. 3 days later, I received my cheeks. Simple as that br> br> |
|
br>microtonal |
br> phisynth wrote: | microtonal wrote: | Would you mind explaining where or how you had the large aluminum side panels made? |
Sure, it's a design I made based on Tom Bugs bomber cheeks. He was kind enough to send me his technical file, I adapted it for 4U, then sent the .DWG file it to a local metal workshop. 3 days later, I received my cheeks. Simple as that |
Thanks. I think the sleek metal look matches the Serge very well, much better than wooden cabinets and wood end cheeks. br> br> |
|
br>boops |
br> 3001 wrote: | Hey, anyone know anyone who is making cases that look purty for Serge modules?
I really love the way Serge sounds, but I think they can be ugly as sin.
what are people doing for DIY? I think I saw a good one, was it phisynth that has those sweet metal sides? |
Hello
I ve décided to try a custom serge càbinets ,production diy or built by me,like the custom buchla i made atm
https://www.muffwiggler.com/forum/viewtopic.php?t=129997&highlight=
Just 2 panels one?
Big one with 2x 4 Ù wide. And 3/5/7 rows?aluminium cheeks ,sure
Ideas welcome
If interested PM Thanks br> br> |
|
br>n3wt15 |
br>I had mine in a rack case, but wanted them on more of a curve to conserve on cable length, so i cut two pieces of plywood and screwed the rack ears into them, it looks absolutely terrible, but it does the job lol
[img]https://scontent-ord.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10998041_ 644965892299158_358102230152796854_n.jpg?oh=a858a09190d00d005b3eb09ea6 536177&oe=558A567E[/img] br> br> |
|
br>m0rb1d |
br>
I built an acrylic case for mine. It really helped the whole thing feel like an instrument with this layout and was truly awesome. I downsized on the Serge though and now it sits in my closet. br> br> |
|
br>southphillysynths |
br>These are awesome! I really love the old school 'hockey stick' type ones such as Todd Barton's setup. I hope to build something like that after building a few panels. br> br> |
|
br>Nils |
br>I never got around to actually making this, so this is just a computer rendering.
The rear leg holds the PSUs.
br> br> |
|
br>boops |
br> Nils wrote: | I never got around to actually making this, so this is just a computer rendering.
The rear leg holds the PSUs.
 |
I càn make something like this,with blue anodised aluminium....PM br> br> |
|
br>aethyr |
br>very nice design! br> br> |
|
br>B-ry |
br>I love this design.
I’d be interested in producing a few sets.
With your permission of course.
Also, would it be possible to acquire the complete design?
Maybe we can PM and discuss.
Cheers! br> br> |
|
br>underthebigtree |
br>Does anyone have the .dwg files that Phisynth mentions at the top of this thread - for the gorgeous aluminum cheek blocks that were modified from the Bugbrand Bomber cheeks?
I'd love to have 2 sets of the 4 panel cheek blocks made for my upcoming Serge system, but have not been able to get hold of Phisynth. Any help would be most appreciated.
Many thanks,
Nick (Underthebigtree) br> br> |
|