MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Ardcore voltage recorder
MUFF WIGGLER Forum Index -> SNAZZY FX  
Author Ardcore voltage recorder
silversurfer
Hi guys,
I can't get the cv recorder to work.
Using the 'AC23_VoltageRecorder' sketch.

A2 - cv from an envelope.
CLK - nothing yet as recording.
A3 - gate signal, same one as triggering the env.
D0 - filter cv input.

It says A3 input need to go HIGH to trigger the recording. I've tried gate input, lfo inputs, turning the knobs. What exactly does it mean 'go high'?
I've also put gate into CLK in but nothing.
I'm stumped on this sketch, what am I doing wrong?

Cheers 8_)
loss1234
ok

1. you MUST Have a clock going into clock to record (clock speed=recording speed and playback speed

2. high is an ON from a gate
BUT all you have to do is move the knob for that jack to 10 and you are high


3. make sure to plug input source into a2 with knob a2 at 10

its not in front of me...its 3am
i think you flip knob a3 to high to start recording then flip it back to zero

this will start the recording


you record until its full

then playback is fast or slow depending on clock


good luck
silversurfer
loss1234 wrote:
ok

1. you MUST Have a clock going into clock to record (clock speed=recording speed and playback speed

2. high is an ON from a gate
BUT all you have to do is move the knob for that jack to 10 and you are high


3. make sure to plug input source into a2 with knob a2 at 10

its not in front of me...its 3am
i think you flip knob a3 to high to start recording then flip it back to zero

this will start the recording


you record until its full

then playback is fast or slow depending on clock


good luck


Sorry for the delay in replying. That works a treat now, thanks for help.
I just can't get enough of this module, wondering if I need another!
puppydogfish
That works sell aion kinah a treat now, thanks for help.
MUFF WIGGLER Forum Index -> SNAZZY FX  
Page 1 of 1
Powered by phpBB © phpBB Group