MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[Shipping] - Euro Panel/Kit for Serge Resonant EQ Mk. II
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3 ... 25, 26, 27  Next [all]
Author [Shipping] - Euro Panel/Kit for Serge Resonant EQ Mk. II
clarke68
Hey all,

Negativspace has been hard at work on a new daughterboard for the Serge Resonant EQ project we did back in 2012. Behold, the Serge Resonant EQ Mk. II:



As before, the panel is 32HP, and requires CGS202. Negativspace's new daughterboard is improved in a few ways:

- No panel wiring! I mean it this time. *All* of the panel-mounted components solder directly to the daughterboard.

- A bunch more outputs, including separate outputs for each frequency. Makes this module into a hardcore, fire-breathing feedback machine.

- Designed for use with Bourns 45mm slider pots, with LEDs

Here's how it looks in real life:




Here's a photo of CGS202 mounted on the new prototype sub-board:




Official BOM:
Quote:

SMT Components
[3] TL074 (SOIC-14)
[10] 330R Resistor (0805)
[25] 47k Resistor (0805)
[2] 0.1uF Ceramic capacitor (0805)

Through-hole Components
[18] Kobiconn 16PJ138 jacks
[10] Bourns or Alpha 45mm LED sliders
[2] Alpha 9mm pots or similar, value 50k Audio.
[10] LED Current-limiting Resistors - value varies by slider brand and LED color. Adjust to taste.
[2] 22uF Electrolytic capacitors
[2] 1N4001 Diode
[1] 2x5-pin Eurorack power header

Hardware
[6] 10mm standoffs (between panel and daughterboard)*
[4] Standoffs (between CGS202 and daughterboard)**
[?] Appropriate hardware based on the particular choices made for the two above items.

* = I highly recommend metric M2.5 screws & 10mm standoffs. The panel holes are too small for M3 screws and #4-40 standoffs don't come in 10mm lengths. Unlike many projects, the standoff height in this one is somewhat critical. It has to match the jacks.

** = The height of these is noncritical, you may as well stick to 10mm if you're ordering them but they don't have to match anything else.



The newest (and still coolest) way to get this unique circuit into your Euroracks.

Panel Sets are sold out.
A number of people have yet to pay for their orders, so the ordering information below is for them. Thanks for all your support!


Pricing
Pricing is confirmed! $70USD for both the panel and sub-board. I will be collecting payment and shipping them out together.


Shipping Info
U.S. - $5.80 Priority 2-Day
Canada - 1 set: $9; 2 sets: $10 International First Class
International - 1 set: $13; 2 sets: $15 International First Class

I'll do a custom quote for any international orders of quantities over 2. Note that International First Class is a bare-bones shipping service with no tracking, delivery confirmation, insurance, etc. Other services are available if you need something like that (for a lot more money) just let me know when you place your order.



Order Info
At this point, shipping is set to begin the first week in November, I've only got the bandwidth to do a certain number each day, and I will ship them out in roughly the same order that the orders came in.

Once I start shipping, I'll send reminder PMs out to those of you who have expressed interest in getting a panel but have not placed an actual order. There's no real deadline, but also no problem if you are no longer interested, just let me know.

When you're ready to pay, send the following to me either by PM or email at clarke at muffwiggler dot com:

Quote:
I'm ordering [x] sets of the Serge Resonant EQ Mark II panel and daughterboard for $xx, plus shipping, for a total of $xx.

I'm aware that I may have to pay additional amounts of customs and tax in my country.

I'm also aware that I'm only buying screened and drilled panel that may help me building an electronic module - I'm *not* buying a diy kit, not a "project" - just a screened/drilled panel. I know how to build electronic circuits and I am trained in electrical safety matters. The seller of these panels will not be held responsible for any damage that results from these panels, directly or indirectly.

My shipping address is

xxxxxx
xxxxx
xxxx
xxx

My PayPal address is xxxx@xxxx.com
My Forumname is xxxxxx


When I get your order, I will reply with a Paypal invoice, due in one week.

Thanks for all your support for this project, you guys have been great!
clarke68
Order List

4285407da1d2a63820a3007c1 - 1
ablearcher - 1
agitprop - 1
apoisontree - 1
atari5200 - 1
bennelong.bicyclist - 1
bkbirge - 4
blip - 1
c1t1zen - 2
cane creek - 1
ClausF - 1
CrankSatori - 1
corpusjonsey - 1
daluxer - 1
davidschwan1 - 2
designator - 2
dogmeat - 1
dropmotif - 1
earlabs - 1
endosine - 2
FetidEye - 3
fiocz - 1
flyingMono - 1
frozencore - 1
fuzzbass - 1
gbiz - 1
ghostcode - 1
gwaidan - 1
jaidee - 1
jestern77 - 2
jflower - 1
jjacobkelly - 1
jules - 2
kasey - 2
kires - 1
lessavyfav - 1
lintfresh - 1
listentoaheartbeat - 1
livefreela - 1
lombrose - 1
Low-Gain - 10
magneticstripper - 2
makers - 1
mapmap - 1
migrations - 1
mikecameron - 1
monkfish - 1
mono-poly - 1
mr.sling - 1
mush - 1
nangu - 3
ndkent - 1
neon - 2
noisefor - 1
nord - 2
olga42 - 1
onlyHzwhenI... - 2
orbless - 1
paperwork - 1
pfurmel - 1
pulse divider - 2
prscrptn - 2
Raytracer - 1
Reality Checkpoint - 1
regenbot - 1
rockwoofstone - 1
Royalston - 1
ruidobello - 1
sammy123 - 1
Scvnger - 2
shapesofglory - 2
simfonik - 2
simot99 - 1
spacenoodle - 1
spneca - 1
Stab Frenzy - 2
Stinkier86 - 2
Suf-fuD - 1
talfred - 1
tb323 - 2
the bad producer - 1
thecureForSin - 1
udbhav - 1
unease - 1
vicpop - 1
wellurban - 1
windspirit - 1
woodster - 2
xahdrez - 1
yan6 - 1

Payment received from people in blue
Orders have shipped to people in green
rico loverde
interested in one!
prscrptn
Yes, Yes, Yes! thumbs up
sammy123
Count me in for one please. thumbs up
lombrose
Interested in one hyper
vicpop
I'm interested in a set
negativspace
I am so in. w00t

Note that I've added protection diodes to the daughterboard since the photo in the OP was taken.
ndkent
yes, would like one.
mush
I want one.
limpmeat
I'm in for one
thresholdpeople
I'm in!
ablearcher
I'm in for a set. Pre order or stock doesn't matter to me.
bennelong.bicyclist
One set (panel and board) please.
unease
I'm in! One set!
paperwork
I'm in & happy to pre-order!
olga42
I'm in for a set please!
l e b e r
Yes please!
FetidEye
i'm in for 2 ,maybe 3 sets!!

w00t SlayerBadger!

pre-order is fine by me, you guys rock
Synesthesia
in thumbs up
shapesofglory
I'm in for two! MY ASS IS BLEEDING
cyklopljud
Interested!
woodster
we're not worthy

2x panel/pcb sets for me please.
Raytracer
1x panel + pcb set for me please. I'm completely ok with pre-ordering.
Reality Checkpoint
Oh for goodness sake!

I am trying to streamline here!!!!!!!!!

Yes please, one set!
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3 ... 25, 26, 27  Next [all]
Page 1 of 27
Powered by phpBB © phpBB Group