MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Blacet Sequential switch / scanner
MUFF WIGGLER Forum Index -> Fractional Rack Modules  
Author Blacet Sequential switch / scanner
chamomileshark
I find myself hardly ever using these - having 3 rather than 4 outs seems a bit awkward for sequencing and I don't think you can go to just two steps, it always goes to 3.

Interested in what uses other Frac owners make of these modules.
dJ dAb
On the seq switch there's a dip switch on the pcb for selecting 3 or 4 steps.
e-grad
Use it for waveforms to create new waveforms and/or as a divider:

fracmonkey
Deja vu but there is a video....

https://www.youtube.com/watch?v=dzd40LYmbQo

(The Scanner is NOT bidirectional.)
chamomileshark
thanks for the vids - I had seen them before but it reminded me to try the last patch - I think that uses the scanner because it crossfades from waveform to another.

thanks also for the tip about the dip switch - I didn't realise it was there.
Cat-A-Tonic
I wonder if the Blacet Scanner can operate at video rates & bandwidth
like the Brown Shoes Only scanner...
MUFF WIGGLER Forum Index -> Fractional Rack Modules  
Page 1 of 1
Powered by phpBB © phpBB Group