Newb looking for 'Patching for dummies' kind of thing

Anything modular synth related that is not format specific.

Moderators: luketeaford, lisa, Kent, Joe.

Post Reply
User avatar
particleswillbewaves
Common Wiggler
Posts: 55
Joined: Wed Nov 09, 2016 5:34 am
Location: bxl
Contact:

Post by particleswillbewaves » Sat Dec 10, 2016 12:51 pm

Thanks for the list! Trial and error works but it works better after studying a little bit :)

User avatar
srogers
Common Wiggler
Posts: 169
Joined: Tue Dec 27, 2016 10:32 am
Location: Brooklyn, NY

Post by srogers » Wed Dec 28, 2016 7:23 pm

Thanks for compiling this - the amount of information here is a bit overwhelming but this is super helpful!

yes0have0some
Learning to Wiggle
Posts: 12
Joined: Sun Dec 25, 2016 10:28 pm

Post by yes0have0some » Fri Dec 30, 2016 8:28 am

timmcg wrote:Yes, the audio will be continuous if you patch your oscillator into a VCF and not a VCA... assuming that the filter isn't turned all the way down so that it filters out all of the sound.

That's why we have VCAs. They will stop the sound from being on all the time and then when you apply a CV input it will turn up and you'll only have an audible sound when there is a positive voltage applied to the CV input, assuming that the gain knob on the top is turned all the way down.
Thank you for this. I was having a hard time making this click in my head and this took care of it.

Tatam
Learning to Wiggle
Posts: 7
Joined: Sat Dec 24, 2016 8:52 am

Post by Tatam » Sun Jan 01, 2017 6:10 pm

Not sure if new link has been posted already, but this thread led me to the SOS Synth Secrets, which was moved and now all archived here:
https://web.archive.org/web/20160403115 ... ecrets.htm

Thanks for the tip!

User avatar
arronbru
Learning to Wiggle
Posts: 3
Joined: Wed Jan 25, 2017 5:05 pm
Location: UK

Post by arronbru » Wed Feb 01, 2017 4:35 pm

Thanks for the posts.

CycleOffset
Learning to Wiggle
Posts: 8
Joined: Wed Jan 04, 2017 7:58 pm

Post by CycleOffset » Tue Feb 07, 2017 6:59 pm

I am brand new to modular. Just about 4 weeks in... Really appreciate all the great info on this site, but honestly, none of it made too much sense until I actually got something in my hands to work with. But, I think all the reading helped tremendously with the learning curve - at least for the basics.

User avatar
rayaline
Learning to Wiggle
Posts: 13
Joined: Tue Jan 31, 2017 10:57 pm
Location: CHICAGO
Contact:

great questton!

Post by rayaline » Wed Mar 01, 2017 6:31 pm

thanks for this! I am new modulars and just jumped the boat and brought like ten modulars and wondering where to start?

dlk1100
Learning to Wiggle
Posts: 39
Joined: Fri Feb 24, 2017 12:08 pm

Post by dlk1100 » Wed Mar 08, 2017 1:42 pm

so much great info!

User avatar
quixot
Learning to Wiggle
Posts: 44
Joined: Fri Apr 14, 2017 9:16 am
Location: mid-atlantic

Post by quixot » Fri Apr 14, 2017 9:34 am

Exactly what I needed. Thank you for this!

User avatar
stephenmendes
Common Wiggler
Posts: 133
Joined: Wed Jan 13, 2016 4:30 pm
Location: Barbados
Contact:

Post by stephenmendes » Mon May 29, 2017 7:10 am

I have started documenting my patches with short videos on my Youtube channel .... not only may this give others some good ideas to try.... but it could also be beneficial to me, when I want to get back a patch years later.... I think a short Youtube 'walk-thru' video is the fastest and easiest way to document a patch.... no fussing with diagrams and words.... simply video the wires and knob settings and TALK the 'patch' (if the wires are looking too tangled to be clear in the image).

Let me know what you think.

Admittedly my system is small (44-space DOTCOM) with 'basic' function modules ..... but I can make loads of sounds with it.

If you like my idea subscribe to channel ..... and just wait for next video or send suggestions .... I try to put them up every week.

https://www.youtube.com/user/stephenmendes1

sam_schorb
Learning to Wiggle
Posts: 19
Joined: Sun Jun 25, 2017 6:15 pm

Post by sam_schorb » Fri Jun 30, 2017 8:13 am

I really liked to tuesday night patching series on youtube

keytarcatholic
Learning to Wiggle
Posts: 5
Joined: Wed Aug 23, 2017 7:25 pm

Post by keytarcatholic » Wed Aug 23, 2017 8:05 pm

Wow, so much helpful info it's almost not helpful...almost.

User avatar
SonicVoltage
Common Wiggler
Posts: 162
Joined: Sun May 21, 2017 9:25 am
Contact:

Attenuator - Attenuverter - DC Offset

Post by SonicVoltage » Wed Oct 04, 2017 3:55 am

Hi,
I am posting here because in this latest video I show how to patch an Attenuator / Attenuverter + DC Offset to have control over Voltage Signals (LFO or Random CVs) so that you have live control over Pitch Transpose, Notes range, DSP Parameters, etc.. driving melodies coming out of your VCO.

Note: although this is a full video review of the ALM Busy Circuits ALM-010 (Attenuverter + DC Offset)... I show how to build the patch, how the patch works and you can create same type of patch using any attenuator/attenuverter/DC Offset module.

You can see how attenuation, inversion, dc offset is patched and how it affects the signal, in the video I show the waveforms (original and processed by attenuverter/offset) on a Mordax Data so you can graphically see what is happening (before and after waveforms displayed at the same time for easy understanding).

I hope this is helpful to newcomers.
[video][/video]

Clickable Index under the video description. Simply click on Show More in the video description to show the clickable index

flipSolver
Learning to Wiggle
Posts: 4
Joined: Wed Jun 14, 2017 7:36 am
Location: Brooklyn New York

Post by flipSolver » Sat Nov 25, 2017 7:28 pm

Really helpful list. Thanks for posting. I look forward to making my way through it.

Aleksi12358
Learning to Wiggle
Posts: 18
Joined: Fri Dec 01, 2017 6:34 am
Location: Finland

Post by Aleksi12358 » Sat Dec 02, 2017 9:32 am

Thanks for this list! I will try to read it all so that I can build good set up for me.

illnoir
Learning to Wiggle
Posts: 5
Joined: Wed Jan 17, 2018 12:40 pm

Post by illnoir » Wed Jan 17, 2018 12:55 pm

Lots to read. Thanks!

sullivanmodular
Learning to Wiggle
Posts: 2
Joined: Fri Feb 09, 2018 12:27 pm
Location: Raleigh/Durham

Thank you

Post by sullivanmodular » Fri Feb 09, 2018 12:48 pm

I am new to this and this post was super helpful. Thanks for the links especially.

I do have one question:

How much should you be expecting to first spend for a simple build as a noob?

Thanks

chris23
Learning to Wiggle
Posts: 3
Joined: Sat Jan 27, 2018 7:25 pm
Location: SF Bay Area

Post by chris23 » Sat Feb 17, 2018 1:59 pm

As someone mentioned, buried in some deep thread here, I'm having to unlearn years of structured synthesis architecture.

Eg simply shaping a sound with an ADSR is not at all straight-forward (covered in this thread thank you). I keep finding I need to order yet another utility module for yet another $100+.

2 months of research (thanks Wigglers!) and now a couple weeks of hands-on and I'm fairly lost in the woods but having fun

Sleeepwalk
Learning to Wiggle
Posts: 20
Joined: Fri Mar 09, 2018 9:08 pm
Location: Los Angeles

Post by Sleeepwalk » Fri Mar 09, 2018 9:11 pm

Very helpful thanks :)

Evces
Learning to Wiggle
Posts: 3
Joined: Thu Feb 22, 2018 10:23 am
Location: Kentucky

LFO tutorial video

Post by Evces » Mon Apr 16, 2018 6:20 am

Hi all. I just saw a very clear walk-through of several uses for LFOs. Sharing it here for my first post. I'll be buying my first case and modules soon pending sale of a guitar. Really appreciate this cool forum! Here's the video:



Cheers!

dan903
Learning to Wiggle
Posts: 7
Joined: Fri May 04, 2018 1:03 pm

Post by dan903 » Fri May 04, 2018 1:07 pm

Thank you! :)

User avatar
Pelsea
Ultra Wiggler
Posts: 922
Joined: Thu Apr 19, 2018 11:46 am
Location: Santa Cruz CA
Contact:

Post by Pelsea » Wed May 09, 2018 4:56 pm

About that don't patch outputs together thing:

(Someone posted the question why? and I didn't see an answer.)

Simple answer-- poof!
Simple answer corrected-- maybe poof!

Long winded answer-- The current pulled from an output depends on the voltage and impedance (resistance will do for now) of the thing is it connected to. In the olden days, outputs usually had 600 ohms impedance, because the phone company said so. That's not much, but will prevent damage to an output circuit if it is accidentally shorted to ground. However, if an output is shorted to another output that happens to be negative (or opposite what output 1 is) there could be twice as much current as was expected. poof.
But nowadays, folks building synthesizers realize that newbies will connect outputs together, so any designer with brains will include extra output impedance as protection. But, if you you do plug two outputs into a multiple, you won't get a mix of the two signals, you will get some sort of average (weighted by the respective output impedances). That's probably not what you want. So use a unity gain mixer instead.
Books and tutorials on modular synthesis at http://peterelsea.com
Perfection is the enemy of the good.
pqe

buhl89
Learning to Wiggle
Posts: 22
Joined: Wed May 30, 2018 2:10 pm
Location: Copenhagen

Post by buhl89 » Mon Jun 04, 2018 5:59 am

Very helpful thread. Thx.

zfealk
Learning to Wiggle
Posts: 5
Joined: Thu Aug 09, 2018 4:06 pm
Location: Detroit, MI

Post by zfealk » Sun Aug 12, 2018 11:16 am

thanks !

stegi
Learning to Wiggle
Posts: 8
Joined: Thu Sep 20, 2018 8:59 am
Location: Italy

Post by stegi » Mon Oct 15, 2018 3:37 am

Thanks, very helpful!

Post Reply

Return to “Modular Synth General Discussion”