MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Modular modulars DIY, L10 personal way of pcb
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author Modular modulars DIY, L10 personal way of pcb
autocet
Hi,

I'm Jordi and my nick name is autocet, from Barcelona (Spain)

In Eurorack Modules lintfresh propose

lintfresh wrote:
Hi Jordi, welcome!

Very cool ideas. You may want to move this post to the DIY forum. The cats over there should find this very interesting.


You can see this thread here, L10, My personal PCB format

Against that I repeat here some important information,
this is years of my personal way to do a economic electronic modular pcb


My idea is continue developing as these PCBs to compose modules EURORACK
If someone likes the idea, I invite you to use this format for free and to share designs, with no restrictions like Open Hardware and DIY.

And this is also important to construct a modular module



this is a mono polar version


And this is an example

This is a VCO (extremely simple) with LM311 in construction


You can download schematic here

You also download pcb masck here

You can explore a open directory in my private server above my L10 way of pcb, nothing is finished (in catalan or spanish).

http://autocet.no-ip.org/teorix/
falafelbiels
That is an impressive looking lot of stuff!
I am afraid i am missing the point of your layout ideas though, do you wish to introduce a new format?
revtor
Click on the link at the top of his post and it will all become clear.

its basically a way to provide power to the modules within the rack.
autocet
falafelbiels wrote:
That is an impressive looking lot of stuff!
I am afraid i am missing the point of your layout ideas though, do you wish to introduce a new format?


Wow, you see to me like wicked! woah introduce a new format ... what torture! Mr. Green

No, just looking for people who like my system and share with them. thumbs up
latigid on
Like L-1 but Catalan and 10 times bigger!

Just kidding we love all of you!
drip.feed
Hey autocet, what do you mean by 'wab'? Wab means 'scrotum' here in Belfast! lol
autocet
It really was something too personal. d'oh!
I meant "way". Already edited

thanks
autocet
statistics @ 2/4/15

Forum: Befaco (DIY = Hazlo tu mismo)
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770
Views: 172
Answers: 0
PM or E-mail: 0
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=773
Views: 32
Answers: 0
PM or E-mail: 0

Forum: Electro-Tech-Online
Thread: http://www.electro-tech-online.com/threads/l10-my-way-to-make-pcb.1436 47/
Views: 87
Answers: 2
PM or E-mail: 0

Forum: PCB Heaven
Thread: http://www.pcbheaven.com/forum/index.php?topic=1853.0
Views: 30
Answers: 2
PM or E-mail: 0

Forum: Edaboard
Thread: http://www.edaboard.com/thread331178.html
Views: 102
Answers: 0
PM or E-mail: 0

Forum: Sparkfun Electronics
Thread: https://forum.sparkfun.com/viewtopic.php?f=5&t=40315
Views: 26
Answers: 0
PM or E-mail: 0

Forum: Electronics Forum
Thread: http://www.dutchforce.com/~eforum/index.php?showtopic=43312
Views: 85
Answers: 2
PM or E-mail: 0

Forum: Muff Wiggler (Eurorack Modules)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131208
Views: 374
Answers: 3
PM or E-mail: 0

Forum: Muff Wiggler (Music Tech DIY)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131269
Views: 222
Answers: 4
PM or E-mail: 0
Starspawn
Yep, this is where its happening grin
It is interesting for sure, and not all that out there.
Just think approach.
I think people are just waiting to see if you are going to sell them an interesting project or inspire them with circuit designs really.
The chance of someone taking your idea and going with it themselves though ... it will take time and example I think.
InfraXpert
An intriguing idea, but to take it further than just another power distribution standard someone have to define the sub-modules.

Like:
Exponential converter
VCO-core
Waveshaper

And there should be a defined interface for the sub-modules as well.
autocet
There ara several family's

Signal adapters:
AmpliLin - Lineal
AmpliLog - Logarit
AmpliExp - Exponential
AmpliDif - Diferential

Signal drivers:
DualOTA - based in LM13700
Dry/WetControl - Efects proportional mixer
Atenuator - Reduce gain manualy
Inverter - may be combined with Atenuator

Circuits than need OTA to control:
LowPassFilter
HightPassFilter
BandPassFilter

Signal converters:
SineConverter
TriangleConverter
PWMConverter
FrequencyDubler
FrequencyDivider

Tempus control:
RiseFallGen
CV_ClockGen
Sample&HoldGen

Oscillators:
Sawtooth
Squared
Triangle
Sinus

Miscellanious
PowerAmpli - to Reverb for instance
VuMetter - local monintor
Internal Mixer - to unifique out
VoltReference - for estability
Out_Monitor - several quine of outs
PowerBus - board that inject power to bus

And more than I forget

Knobs in 90ยบ
bus by spacers

Mounted Like this



Thats only need a Aluminium Printed Frontal
snaper
Do you have a list about the working modules?
Maybe etch art, parts layout?
There are some itneresting stuff and I always have some free space for intersting stuffs.
autocet
These are my 99 balloons. This is the map of all the current L10 project.


the same image to another server (if I modify it)

- Yellow folders are not materialized, "Lliure" means that they are empty. If you have any idea what the name means keep it there.
- The chips have something done in form of .brd Kicad.
- The earth balloons projects are now in progress.
- The robot R1 is a rolling project, not finish idea, still in my mind.
- The folder 00 are rejected idea from the project.

If any name you think might be interesting as I commented in the forum. Surely you have better ideas than me.

Notice, do not look for perfection.
Tomorrow might be change.

Thank you, and be patient. I do it all alone.


Actual StackTester
autocet
"Teorix" folder is not operative in my server now, if no body is interested in the project I do not offer content. Because that some folder have no content or are redirected to an other virtual space. Please, comment or contact PM to open contents.

Be patient, this is a lot of work.
I ask nothing in return, but I will not give gifts to the devil.

Thank you
autocet
I invite to discover a method to design and make real circuits.

https://www.autocet.cat/theorical-l10-project/
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group