MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Mini Modular knob caps
MUFF WIGGLER Forum Index -> Mattson Mini Modular  
Author Mini Modular knob caps
billsship
Anyway you could tell us where you got these little knob caps? Or could you possibly sell some of these? They're really nifty. The picture is from the e350 2hp expander thread.
Thanks
YellowBlood
Not sure if these would fit but they do stretch, there are also shorter ones on the site.

http://www.mammothelectronics.com/Toggle-Switch-Cap-p/811-t1-0001.htm
mmm
YellowBlood wrote:
Not sure if these would fit but they do stretch, there are also shorter ones on the site.

http://www.mammothelectronics.com/Toggle-Switch-Cap-p/811-t1-0001.htm


Those are pretty small.
I have a bunch that fit over knurled pot shafts.
I PM'd him.

Mattson Mini Modular
YellowBlood
cool! where do you get them if you don't mind me asking? I might want to pick some up eventually Mr. Green thanks!
mmm
YellowBlood wrote:
cool! where do you get them if you don't mind me asking? I might want to pick some up eventually Mr. Green thanks!


I'm trying to remember the company... It was 7 years ago...

I ordered 5000 of them (MOQ) and I've used about a third woah

They're little plastic covers primarily utilized for protecting screw threads during sandblasting operations....

I sorta re-purposed them because my pots were so close together. whistlin'
YellowBlood
cool, well in the future I'll give you a shout and see if you still have some thumbs up
mmm
YellowBlood wrote:
cool, well in the future I'll give you a shout and see if you still have some thumbs up


Found my 7-year old invoice...

Its a company called MoCAP.

They make a ton of different sizes and shapes of all sorts of stuff.

for a 1/4" shaft, i picked up the RVC9012
.218" x 0.500" std cap in vinyl.

http://www.mocap.com/plastic-caps-round-vinyl.html

Their catalog has all sorts of stuff that make you think about what you could use them on...

G Mattson Mini Modular
billsship
MMM was kind enough to send me a few, and I also grabbed a few from this seller on eBay (http://www.ebay.com/itm/261422967620?_trksid=p2060778.m2749.l2649&ssP ageName=STRK%3AMEBIDX%3AIT)

They're both very similar, but the ones from the Mini Modular are thinner and fit just a tiny bit better. The ones from eBay fit well, but aren't as flush with the pot shaft as the others.

My only complaint is that they were a little bit slick on my fingers. Maybe it's because I just cooked breakfast!

Thanks again! SlayerBadger!
MUFF WIGGLER Forum Index -> Mattson Mini Modular  
Page 1 of 1
Powered by phpBB © phpBB Group