MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

.div with LFOs
MUFF WIGGLER Forum Index -> STG Soundlabs  
Author .div with LFOs
oneano
I use a doepfer quad lfo as my main clock and have no issues with it with any modules.

Can I use it with the .div module and get the expected results?
DonaldCrunk
My .div is not really picky about what it divides, an LFO will be fine. everything works as you would expect and I've had no troubles triggering things with it.
oneano
Audio signals?
det3
While the .DIV was designed to operate with 0-5V signals, the input protection on it will allow it to work with audio as long as it's +/-5Vpp.
oneano
Ok, that is good info.

I will be using it with my doepfer A-143-4

it should be a lot of fun!

Thanks.
smirnow
Another question about .div . Is it possible to divide gate signals by .div? it's mean longer signals than trigger.
lvoemachine
yes, I do that all the time.
suitandtieguy
smirnow wrote:
Another question about .div . Is it possible to divide gate signals by .div? it's mean longer signals than trigger.


the output gate length is equal to the input gate length, so you can use any gate signal longer than 1/20,000th of a second or so in length.
smirnow
lvoemachine wrote:
yes, I do that all the time.


Thx For info guys!
MUFF WIGGLER Forum Index -> STG Soundlabs  
Page 1 of 1
Powered by phpBB © phpBB Group