MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

New IFM module? Dunst
MUFF WIGGLER Forum Index -> Ciat-Lonbarde Goto page Previous  1, 2 [all]
Author New IFM module? Dunst
333
paperwork

Thank you! Quite an interesting range of noise SlayerBadger!
Nofrenchtests
thanks paperwork, definitely sold me on it.
This is fun!
damase
what an excellent demo. cant wait to get one. and yes soundcloud definitely destroys high end you are not mistaken.
yghartsyrt
ordered!
kozepz
Great module, very diverse noises!
Thanks for the soundclips!
reppiks
Anyone know what the trimmer on the back of Dunst is for?
rodrigo
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.
reppiks
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).
pugix
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


I just picked up a used Dunst and while checking it out also noticed the very low amplitude of the noise output (lower right). I'll be putting it on the scope today and might write up something about what I find.

So far it looks like the top section is the more useful, with the variable ramp being useable as an envelope, and the pulse output works great as a random trigger.
subliminal drew
I’m relieved to hear to see other folks are having the same low-output experience as me. I also bought one used and was trying to figure getting the most from the BNOICE outputs. Looked real weird on my cheap ’scope; no insights gained.
I guess I’ll have to try feeding it more input voltages and see how the organism reacts.
rodrigo
From the short time I played with it on a scope, it appeared to be white noise that was DC offset, but then clamped/limited to 0v to 5v, so if you offset negatively, only the little bits at the top of the noise come through, but as a result it's quieter.

The loudest it got was offsetting everything up, so the whole noise signal wasn't clamped, but that was still more or less limited to half volume.
Bomauch
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


Can someone help me find the trimmer on the back of Dunst? I just looked today and din't find it. :(
pugix
Bomauch wrote:
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


Can someone help me find the trimmer on the back of Dunst? I just looked today and din't find it. :(


Some don't have a trimmer. Mine doesn't.
Bomauch
Oh dang! The output is definitely low for me as well- but I’ll just have to make it work with what I’ve got!
Kingnimrod
best way to deal with the noise is to get a line amp or a VCA with boost like the intellijel quad VCA. You could also get aggressive with the FSS Gristleizer modules. The preamp offers 40db of gain plus a boost switch and "bite" control, in addition to some EQ and other stuff.
rodrigo
Finally got around to "calibrating" mine (basically doing what @reppiks did). It's a shame the Hiss output is so quiet though.


pugix wrote:

I just picked up a used Dunst and while checking it out also noticed the very low amplitude of the noise output (lower right). I'll be putting it on the scope today and might write up something about what I find.


I wonder if you got anywhere meaningful with scoping it out?
rodrigo
This may be a naive question, but has anyone looked at the circuit/schematic with an eye on having louder output?
jvt
Is there any kind of mod that can be done to raise the "crackle" output for a Dunst that doesn't have the trimmer? Mine is practically silent.
Ras Thavas
jvt wrote:
Is there any kind of mod that can be done to raise the "crackle" output for a Dunst that doesn't have the trimmer? Mine is practically silent.


That's a big "ditto" here as well...
rodrigo
The trimmer doesn't effect the output level of that, but a +1 here as well for a mod to raise the output level.
ClausF
rodrigo wrote:
The trimmer doesn't effect the output level of that, but a +1 here as well for a mod to raise the output level.

Yes. and as long as we don't have this two Doepfer A-183-3 would do the Job. Lot of rack space, I would perfer a smaller with two amplifiers...
jimmie
I'm wondering if there's some intention for the design. Do you people find some effective use of current state?
timoka
[s]http://soundcloud.com/uzala/dunst-pings[/s]

both sides of dunst ping an mmf-1 and crossmodulate themselves.
mortal3
Deleted.
MUFF WIGGLER Forum Index -> Ciat-Lonbarde Goto page Previous  1, 2 [all]
Page 2 of 2
Powered by phpBB © phpBB Group