MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

New IFM module? Dunst
MUFF WIGGLER Forum Index -> Ciat-Lonbarde  
Author New IFM module? Dunst
yghartsyrt
via YouTube. Seems to be somewhat noise related. Great sound as far as I can judge from the video or is this all Zener?
ym2612
Oh wow, the manual is up, too: http://synthmall.com/ifm/ifmDUN.pdf

Sounds very much like the concepts used in plumbutter's Man With the Red Steam (noise/snare).

I really like the sound of Zenert.
Dirty_Bill
ym2612 wrote:
Oh wow, the manual is up, too: http://synthmall.com/ifm/ifmDUN.pdf

Sounds very much like the concepts used in plumbutter's Man With the Red Steam (noise/snare).

I really like the sound of Zenert.


Not to mention the new Tocante! Nice! Both can be ordered direct...
Nofrenchtests
That crackle love
diasporos
Damn it. Can't be ordered yet I guess. Tried. Failed to PayPal.
kozepz
Lovely dust! w00t
A great addition to the other modules.
Dirty_Bill
diasporos wrote:
Damn it. Can't be ordered yet I guess. Tried. Failed to PayPal.


I have an email in to Peter about availability...
diasporos
Dirty_Bill wrote:
diasporos wrote:
Damn it. Can't be ordered yet I guess. Tried. Failed to PayPal.


I have an email in to Peter about availability...


Just did that as well. This came out of nowhere, I was expecting that he would release the Dogslit ((?)) first.
windspirit
Oh the noise tocante looks lovely! Bandpass filtered noise, really amazing how it goes directly from noise to tones.
yghartsyrt
diasporos wrote:
Dirty_Bill wrote:
diasporos wrote:
Damn it. Can't be ordered yet I guess. Tried. Failed to PayPal.


I have an email in to Peter about availability...


Just did that as well. This came out of nowhere, I was expecting that he would release the Dogslit ((?)) first.


i don't want to be another person asking him the same question, so i'm eagerly waiting for your guys' answer …
diasporos
yghartsyrt wrote:
diasporos wrote:
Dirty_Bill wrote:
diasporos wrote:
Damn it. Can't be ordered yet I guess. Tried. Failed to PayPal.


I have an email in to Peter about availability...


Just did that as well. This came out of nowhere, I was expecting that he would release the Dogslit ((?)) first.


i don't want to be another person asking him the same question, so i'm eagerly waiting for your guys' answer …


Will post as soon as I hear. Peter is probably very busy but he'll eventually answer. Rockin' Banana!
glia
https://www.modulargrid.net/e/ieaskul-f-mobenthey-dunst

while you wait...add it to your racks
EarlJemmings
oh wow, that's hot.
I was just looking for a harsh, noisy kinda module, but not your standard cross-modded square waves dealy.

This will do just fine applause
Dirty_Bill
diasporos wrote:


Will post as soon as I hear. Peter is probably very busy but he'll eventually answer. Rockin' Banana!


Vey Busy, According to Synthmall Ordering:

"June 2015: this month will be busy, and there are only about two weeks at the beginning in which I can help you. At the end of the month, and in July and August I will not be dependable, for I am moving house and workshop..."
MrNovember
Just as I was thinking about getting a dedicated noise module It's peanut butter jelly time!
I really like the sounds in that video
damase
Whats the word on dunst? Someone describe how awesome it is please
Dirty_Bill
damase wrote:
Whats the word on dunst? Someone describe how awesome it is please


I don't know who had one, Beuhler? Control has them in stock now...
adammokan
I have one, but recovering from surgery and haven't been able to lift the eurorack case to play with it more. A couple clips on my instagram - here is one... https://instagram.com/p/4LH4rcqX2o
Dirty_Bill
adammokan wrote:
I have one, but recovering from surgery and haven't been able to lift the eurorack case to play with it more. A couple clips on my instagram - here is one... https://instagram.com/p/4LH4rcqX2o


Thanks for the pointer, and speedy recovery!
damase
great video. thank you.
confirmed to me that i need one of these
feel better soon!
adammokan
Another cool thing on the Dunst, but also something I need to explore more, is the ramp output for 'Dust'. I found some solid material by sending that to a Swoop and using the Swoop output to FM back into the Dunst.

I really need to get some more time on the IFM setup, though. I finally got ahold of a Fourses and Barre controller, had them racked for like 6 hours and then my gallbladder decided it wanted to leave my body very frustrating
windspirit
Great videos, speedy recovery fellow space traveler!
333
Very curious about this module. Looking forward to more Dunst sounds/videos from those who already own one.
Nofrenchtests
333 wrote:
Very curious about this module. Looking forward to more Dunst sounds/videos from those who already own one.


Me too, I want some ciat weirdness in my system, and this looks perfect to fill that gap. Just need to hear some more before I commit.
paperwork
Here's an audio demo:

https://soundcloud.com/paperwwwork/dunst-demo

[s]http://soundcloud.com/paperwwwork/dunst-demo[/s]

Soundcloud's compression muddies the high-end a bit, to my ear. It sounds sharper in person :]
333
paperwork

Thank you! Quite an interesting range of noise SlayerBadger!
Nofrenchtests
thanks paperwork, definitely sold me on it.
This is fun!
damase
what an excellent demo. cant wait to get one. and yes soundcloud definitely destroys high end you are not mistaken.
yghartsyrt
ordered!
kozepz
Great module, very diverse noises!
Thanks for the soundclips!
reppiks
Anyone know what the trimmer on the back of Dunst is for?
rodrigo
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.
reppiks
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).
pugix
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


I just picked up a used Dunst and while checking it out also noticed the very low amplitude of the noise output (lower right). I'll be putting it on the scope today and might write up something about what I find.

So far it looks like the top section is the more useful, with the variable ramp being useable as an envelope, and the pulse output works great as a random trigger.
subliminal drew
I’m relieved to hear to see other folks are having the same low-output experience as me. I also bought one used and was trying to figure getting the most from the BNOICE outputs. Looked real weird on my cheap ’scope; no insights gained.
I guess I’ll have to try feeding it more input voltages and see how the organism reacts.
rodrigo
From the short time I played with it on a scope, it appeared to be white noise that was DC offset, but then clamped/limited to 0v to 5v, so if you offset negatively, only the little bits at the top of the noise come through, but as a result it's quieter.

The loudest it got was offsetting everything up, so the whole noise signal wasn't clamped, but that was still more or less limited to half volume.
Bomauch
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


Can someone help me find the trimmer on the back of Dunst? I just looked today and din't find it. :(
pugix
Bomauch wrote:
reppiks wrote:
rodrigo wrote:
reppiks wrote:
Anyone know what the trimmer on the back of Dunst is for?


I was curious of that myself, especially noticing how quiet the noise output is.


So I adjusted the trimmer while listening to the different outputs, and it just affects the maximum density of one of the BNOICE outputs, so I just turned it up to max to give the widest range. Other outputs not affected, and nothing to do with output levels (I use a Befaco InAmp to boost outputs when needed).


Can someone help me find the trimmer on the back of Dunst? I just looked today and din't find it. :(


Some don't have a trimmer. Mine doesn't.
Bomauch
Oh dang! The output is definitely low for me as well- but I’ll just have to make it work with what I’ve got!
Kingnimrod
best way to deal with the noise is to get a line amp or a VCA with boost like the intellijel quad VCA. You could also get aggressive with the FSS Gristleizer modules. The preamp offers 40db of gain plus a boost switch and "bite" control, in addition to some EQ and other stuff.
rodrigo
Finally got around to "calibrating" mine (basically doing what @reppiks did). It's a shame the Hiss output is so quiet though.


pugix wrote:

I just picked up a used Dunst and while checking it out also noticed the very low amplitude of the noise output (lower right). I'll be putting it on the scope today and might write up something about what I find.


I wonder if you got anywhere meaningful with scoping it out?
rodrigo
This may be a naive question, but has anyone looked at the circuit/schematic with an eye on having louder output?
jvt
Is there any kind of mod that can be done to raise the "crackle" output for a Dunst that doesn't have the trimmer? Mine is practically silent.
Ras Thavas
jvt wrote:
Is there any kind of mod that can be done to raise the "crackle" output for a Dunst that doesn't have the trimmer? Mine is practically silent.


That's a big "ditto" here as well...
rodrigo
The trimmer doesn't effect the output level of that, but a +1 here as well for a mod to raise the output level.
ClausF
rodrigo wrote:
The trimmer doesn't effect the output level of that, but a +1 here as well for a mod to raise the output level.

Yes. and as long as we don't have this two Doepfer A-183-3 would do the Job. Lot of rack space, I would perfer a smaller with two amplifiers...
jimmie
I'm wondering if there's some intention for the design. Do you people find some effective use of current state?
timoka
[s]http://soundcloud.com/uzala/dunst-pings[/s]

both sides of dunst ping an mmf-1 and crossmodulate themselves.
mortal3
Deleted.
MUFF WIGGLER Forum Index -> Ciat-Lonbarde  
Page 1 of 2
Powered by phpBB © phpBB Group