MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Galilean Moons (DIY) troubleshooting
MUFF WIGGLER Forum Index -> Hexinverter Electronique  
Author Galilean Moons (DIY) troubleshooting
ilya.n
Hi,

I have a Storm and Moons (DIY) connected via expander cable. The modules had been working OK until I did some rack re-arrangement yesterday.

The issue is that I am getting very very weak output from VCA 2 when using expander connection i.e. when no jack is plugged into VCA 2 IN. When I plug the signal into VCA2 all is working fine. VCA 1 and XOR OUT are all good.

Any advice what to look at is appreciated.

Thanks!
ilya.n
Well, it started working after i took the panel off and pushed all ICs firmer in their sockets... Don't know what was it...
MUFF WIGGLER Forum Index -> Hexinverter Electronique  
Page 1 of 1
Powered by phpBB © phpBB Group