Filthy Filtre: notch out does not respond to Freq or CV

Blacet, Metalbox, Synthasonic, PAiA and the rest.... a frac frenzy!

Moderators: luketeaford, lisa, Kent, Joe.

Post Reply
User avatar
Pozor
Common Wiggler
Posts: 208
Joined: Mon Nov 09, 2009 4:30 am
Location: Neither Land

Filthy Filtre: notch out does not respond to Freq or CV

Post by Pozor » Mon Mar 29, 2010 7:23 am

As the title says: the sound coming from the notch output of my Blacet Filthy Filtre does not respond to tweaking the freq knob or external CV (no filtering). Sound output is OK (distorts somewhat when freq is cranked up all the way). LP, HP, and BP outs respond fine. Any ideas?

User avatar
fracmonkey
JB or not JB, that is the question.
Posts: 275
Joined: Sat Jan 23, 2010 4:16 pm

Post by fracmonkey » Tue Apr 13, 2010 4:04 pm

Have you tried contacting Blacet Service Dept?

I hear they are great.

smoo
Common Wiggler
Posts: 123
Joined: Sun Mar 14, 2010 5:34 am

Post by smoo » Wed Apr 14, 2010 4:08 pm

The effect is really subtle. If it does change - a little bit - its probably working.

User avatar
Pozor
Common Wiggler
Posts: 208
Joined: Mon Nov 09, 2009 4:30 am
Location: Neither Land

Post by Pozor » Wed Apr 14, 2010 4:18 pm

Thanks guys, the filter is at 'my' tech now. Couldn't hear any change in filtering and I am into subtle timbre changes. Don't want to bother John on an issue with a 2nd (?) hand right now.

Post Reply

Return to “Fractional Rack Modules”