Flexible new CV tool: Omnimod

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 6:50 pm

Update April 24:
the production prototype PCB is ordered and will arrive in 2 weeks
I should be able to make the firmware updates for the new screen and test all the new tweaks to make sure its good to go in 2 weeks
then final production begins and as soon as units are packed and ready to ship we will be delivering to preorders ASAP.

New render with the updated screen design:

[video][/video]

limited preorder at macromachines.net

The Omnimod features:

– 4 powerful channels of LFOs, Step Sequencing, Envelope Generation and Envelope Following, in limitless combinations.
– user friendly interface with intuitive visual feedback.
– an oscilloscope mode to visualize input signals: fine tune the extraction of triggers, select different modes, and smooth or scale envelope following.
– full storage and recall of all parameters automagically before power cycling,
– user definable waves for reusing complex individual channel settings.
– 64 storable, recallable, sequence-able, and randomize-able presets
– only 14HP wide, packs loads of useful possibilities in a small space.

Richard Devine · Post by **Richard Devine** » Mon Nov 16, 2015 6:53 pm

SICKKK!!! man this will be the Modcan Quad LFO killer for me! Going to need two of these!

jafbox · Post by **jafbox** » Mon Nov 16, 2015 6:55 pm

so awesome man!!!

goiks · Post by **goiks** » Mon Nov 16, 2015 7:24 pm

i have a front row seat waiting for this.

(thank you for putting the jackfield on top)

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 7:26 pm

goiks wrote:i have a front row seat waiting for this.

(thank you for putting the jackfield on top)

You are welcome

myecholalia · Post by **myecholalia** » Mon Nov 16, 2015 7:33 pm

you've got to be kidding me

would you have information on power requirements as well as module depth, please?

wirelesswine · Post by **wirelesswine** » Mon Nov 16, 2015 7:34 pm

Ordered. Can't wait. Looks amazing!

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 7:35 pm

myecholalia wrote:you've got to be kidding me
would you have information on power requirements as well as module depth, please?

sure, ill add those now.

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 7:39 pm

https://www.modulargrid.net/e/macro-machines-omnimod

peteone · Post by **peteone** » Mon Nov 16, 2015 7:39 pm

awesome video too

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 7:43 pm

I guess someone beat me to the punch on modulargrid, here is the proper link: https://www.modulargrid.net/e/macro-machines-omnimod-

Flohr · Post by **Flohr** » Mon Nov 16, 2015 7:48 pm

Automagically

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 7:53 pm

Flohr wrote:Automagically

hehehe like that

joem · Post by **joem** » Mon Nov 16, 2015 8:47 pm

That seems like some pretty low mA (25 mA +12V, 10 mA -12V) for a digital module... Does the OLED have to do with that? Or is it just magic?

ether · Post by **ether** » Mon Nov 16, 2015 8:53 pm

Badass

Most expensive promo video in Eurorack history?

savethisrocketship · Post by **savethisrocketship** » Mon Nov 16, 2015 8:55 pm

^I was wondering about that, too. Seems too good to be true!

EDIT: too slow. I was commenting on the power specs. Slick video, though!

meatbeatz · Post by **meatbeatz** » Mon Nov 16, 2015 9:36 pm

lovely, I'm all over this!!

just realised I'm going to want a whole row of omnimods. game changer!! (did I just say that!?)

the only thing that could make this better is a 2x larger OLED screen but hey I'm not complaining.

tony d · Post by **tony d** » Mon Nov 16, 2015 9:52 pm

Yeah!!!
Is the limited preorder only for the first run or is this going to be a limited release ?
Also, as others have asked about the power consumption listed, is this a mistake?

I haven't bought a module in a looong time, i've been waiting for the quad lfo to get restocked but this does look perfect.

HIMA · Post by **HIMA** » Mon Nov 16, 2015 10:11 pm

Based on the power consumption being correct, the promise of an early 2016 release and the pure awesomeness of this, i've pre-ordered!

wirelesswine · Post by **wirelesswine** » Mon Nov 16, 2015 10:17 pm

Just ordered my second one. I think Richard's quote of a Modcan Quad LFO rings true. Lots of modulation possibilities with 2 units and a storage strip!

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 11:14 pm

ether wrote:Badass

Most expensive promo video in Eurorack history?

I was an animator for 10 years www.axiom-crux.net

if by expensive you count lack of sleep and health detriment then yes.

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 11:15 pm

limited to ~100 preorder and then we will release more as per demand.

I checked the current consumption the other day and I couldn't believe the multimeter myself.. oled magic.

tony d wrote:Yeah!!!
Is the limited preorder only for the first run or is this going to be a limited release ?
Also, as others have asked about the power consumption listed, is this a mistake?

I haven't bought a module in a looong time, i've been waiting for the quad lfo to get restocked but this does look perfect.

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 11:16 pm

meatbeatz wrote:lovely, I'm all over this!!

just realised I'm going to want a whole row of omnimods. game changer!! (did I just say that!?)

the only thing that could make this better is a 2x larger OLED screen but hey I'm not complaining.

I am actually looking into bigger oled screens but I am not making any promises *yet*

Matos · Post by **Matos** » Mon Nov 16, 2015 11:18 pm

Wait...you were 000? Rad mate!

Axiom Crux · Post by **Axiom Crux** » Mon Nov 16, 2015 11:32 pm

Matos wrote:Wait...you were 000? Rad mate!

once upon a time I did a few releases under that name, including planet mu. always surprised when someone actually has heard them

maybe when I get a few more modules out I will get some time to write tunes again.

MUFF WIGGLER

MUFF WIGGLER

Flexible new CV tool: Omnimod

Flexible new CV tool: Omnimod