nonlinearcircuits NLC panel templates

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, lisa, luketeaford, Joe.

Post Reply
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

nonlinearcircuits NLC panel templates

Post by andrewF » Wed Feb 17, 2016 7:12 am

See this thread for NLC Mouser carts

Put your panel templates in this thread if you want to share. I will also post drill templates for various modules.

note - always check the panel template matches your PCB before drilling.

edit (13/3/2016): It seems there is a 10 attachment per post limit, so scroll down for more panel files in other posts


triple sloth panel

4HP single sloth panel

Multiband Distortion Processor panel

cellf action panel

cellf action panel (with reference points)

wamod mixer panel

eurorack Neuron panel

Brain Custard panel
Attachments
chopper panel.pdf
(7.86 KiB) Downloaded 31 times
triad PANEL VERS1.pdf
(9.34 KiB) Downloaded 20 times
dnmpanelv4.pdf
delay no more
(12.46 KiB) Downloaded 32 times
4seqpanel.pdf
(12.23 KiB) Downloaded 21 times
bools panel.pdf
(9.19 KiB) Downloaded 27 times
dual lfo panel.pdf
(11.57 KiB) Downloaded 20 times
FK1T VCF panel template.pdf
(7.77 KiB) Downloaded 26 times
b0n0 V3 panel template.pdf
(10.63 KiB) Downloaded 17 times
329phase v2 panel template.pdf
(9.28 KiB) Downloaded 44 times
mixseq panel vers2.pdf
1050 mix/seq
(14.34 KiB) Downloaded 28 times
Last edited by andrewF on Mon Apr 18, 2016 6:49 am, edited 9 times in total.
Top
User avatar
MatrixModulator
Wiggling with Experience
Posts: 493
Joined: Fri Nov 28, 2014 10:35 am
Location: Montreal
Contact:
Contact MatrixModulator

Post by MatrixModulator » Sun Feb 21, 2016 6:38 pm

Hi Andrew,

I was wondering where are all the other template files for NLC modules. I don't see them on NLC website.

Thanks
ImageImageImage
Top
User avatar
magneticstripper
Common Wiggler
Posts: 86
Joined: Sun Aug 30, 2009 12:15 pm

Post by magneticstripper » Sun Feb 21, 2016 7:28 pm

Is there a drill layout for Collude?
Top
User avatar
MatrixModulator
Wiggling with Experience
Posts: 493
Joined: Fri Nov 28, 2014 10:35 am
Location: Montreal
Contact:
Contact MatrixModulator

Post by MatrixModulator » Sun Feb 21, 2016 7:35 pm

Oh i just though... are thoses pictures from your facebook can be used as templates for panels or they are not used for that?

Image
ImageImageImage
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Sun Feb 21, 2016 8:04 pm

magneticstripper wrote:Is there a drill layout for Collude?
I will process a batch of various modules today and add them to the 1st post
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Sun Feb 21, 2016 8:06 pm

MatrixModulator wrote:Oh i just though... are thoses pictures from your facebook can be used as templates for panels or they are not used for that?

Image
These are the outputs of a gerber viewer, so maybe not 1:1 scale when you print them out (tbh I haven't tried tho)
I will get the 1050 template up today (and B0N0 & 329)
Top
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels » Mon Feb 22, 2016 9:16 am

the illustrator file that I used to cut my Delaynomore panel
Attachments
DelayNoMore.ai
(226.85 KiB) Downloaded 23 times
Top
User avatar
flab
Veteran Wiggler
Posts: 553
Joined: Mon Jul 29, 2013 12:47 pm
Location: Glasgow,Uk / Volos,Gr

Post by flab » Mon Feb 22, 2016 12:13 pm

i think we have to put those templates and the mouser carts we have in the other thread together , all the NLC resources together.

i have few panel .dwg I will upload them when I will find some time!
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Wed Feb 24, 2016 12:24 am

templates for the giant B0N0, 329Phase, FK1T and 1050mixSeq added to the 1st post
Top
TimoRozendal
Wiggling with Experience
Posts: 386
Joined: Fri Dec 12, 2014 8:03 am
Location: Netherlands

Post by TimoRozendal » Fri Mar 11, 2016 3:18 am

Image

and here is the svg and a photo of my jerkoff panel
Attachments
jerkoff_panel_prod.svg.zip
(5.79 KiB) Downloaded 19 times
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Sat Mar 12, 2016 6:26 am

Thanks Timo

panel templates for DelayNoMore, Triad, dual LFO, BOOLs & 4seq added to 1st post
Top
User avatar
edwinm
Common Wiggler
Posts: 245
Joined: Mon Aug 05, 2013 4:31 pm
Location: London

Post by edwinm » Sat Mar 12, 2016 6:37 am

Thanks for the bools!
Top
User avatar
MatrixModulator
Wiggling with Experience
Posts: 493
Joined: Fri Nov 28, 2014 10:35 am
Location: Montreal
Contact:
Contact MatrixModulator

Post by MatrixModulator » Sat Mar 12, 2016 1:51 pm

Thanks for all theses panel templates, i just realised you posted them hehe.
Thanks :omg:
ImageImageImage
Top
User avatar
MatrixModulator
Wiggling with Experience
Posts: 493
Joined: Fri Nov 28, 2014 10:35 am
Location: Montreal
Contact:
Contact MatrixModulator

Post by MatrixModulator » Sat Mar 12, 2016 10:40 pm

Does theses panel templates are on your website or somewhere else?

- Chopper
- Flip Flop Chaos
- Vactrol Pill

I don't need them right now, no stress hehe!
Thanks :)
ImageImageImage
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Sun Mar 13, 2016 3:40 am

MatrixModulator wrote:Does theses panel templates are on your website or somewhere else?

- Chopper
- Flip Flop Chaos
- Vactrol Pill

I don't need them right now, no stress hehe!
Thanks :)
Chopper is in 1st post, the rest will go here as the 1st post is 'full'
Attachments
SoU panel.pdf
Sauce of Unce panel template
(203.88 KiB) Downloaded 9 times
timbre panel.pdf
(3.05 KiB) Downloaded 35 times
lpg panel.pdf
(2.99 KiB) Downloaded 10 times
collude_ENV_Follower_Panel.pdf
(12.28 KiB) Downloaded 10 times
ffchaos panel.pdf
(8.72 KiB) Downloaded 14 times
vacPiLL panel.pdf
(5.51 KiB) Downloaded 16 times
Last edited by andrewF on Fri Jun 03, 2016 9:28 pm, edited 4 times in total.
Top
User avatar
MatrixModulator
Wiggling with Experience
Posts: 493
Joined: Fri Nov 28, 2014 10:35 am
Location: Montreal
Contact:
Contact MatrixModulator

Post by MatrixModulator » Sun Mar 13, 2016 3:49 am

Thanks !!! :omg:
ImageImageImage
Top
User avatar
Crashlander42
Common Wiggler
Posts: 207
Joined: Sun Jun 24, 2012 12:20 pm
Location: Winter Park, FL
Contact:
Contact Crashlander42

Post by Crashlander42 » Thu Jun 16, 2016 9:17 pm

Here's my Multiband distortion panel.

Image
Attachments
MULTIBAND DISTORTION.zip
(20.6 KiB) Downloaded 8 times
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Fri Jun 17, 2016 8:24 pm

:love: :love: NICE panel!
Top
User avatar
EarlJemmings
Super Deluxe Wiggler
Posts: 1159
Joined: Sun Mar 31, 2013 5:05 pm
Location: Toronto, Canada

Post by EarlJemmings » Fri Jun 24, 2016 7:08 pm

Is the panel for the Squid Axon available? Want to look into making a combined squid axon/brain custard panel
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Fri Jun 24, 2016 7:48 pm

Sorry I don't have my regular pooter here, so cannot access the final version files. Will upload when I get to it.
Top
User avatar
Crashlander42
Common Wiggler
Posts: 207
Joined: Sun Jun 24, 2012 12:20 pm
Location: Winter Park, FL
Contact:
Contact Crashlander42

Post by Crashlander42 » Mon Nov 14, 2016 6:01 pm

Is there a divine CMOS template?
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Mon Nov 14, 2016 6:29 pm

Crashlander42 wrote:Is there a divine CMOS template?
From the bad old days of FPD, here you go:
Attachments
dc.pdf
(248.75 KiB) Downloaded 12 times
Top
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4058
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:
Contact andrewF

Post by andrewF » Mon Nov 14, 2016 6:33 pm

EarlJemmings wrote:Is the panel for the Squid Axon available? Want to look into making a combined squid axon/brain custard panel
Sorry just noticed i never posted the Squid Axon template :doh:
Here it is:
Attachments
Squid axon panel template.pdf
(6.76 KiB) Downloaded 17 times
Top
User avatar
Crashlander42
Common Wiggler
Posts: 207
Joined: Sun Jun 24, 2012 12:20 pm
Location: Winter Park, FL
Contact:
Contact Crashlander42

Post by Crashlander42 » Tue Nov 15, 2016 11:41 am

Thanks!
Top
User avatar
Crashlander42
Common Wiggler
Posts: 207
Joined: Sun Jun 24, 2012 12:20 pm
Location: Winter Park, FL
Contact:
Contact Crashlander42

Post by Crashlander42 » Sun Jan 15, 2017 8:45 pm

The there a panel template for baDumTiss?
Top
Post Reply

Return to “Music Tech DIY”