MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Oakley Bus CV
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Author Oakley Bus CV
trimix
I currently have 3 Oakley modules (VCOs, VC ADSR) in my rig, all connected to the Dizzy board.
On each module there is a small 3-wire cable set (not power) that connects to the Dizzy.

I don't know what this CV bus is doing - my impression is that there is some normalising of functions going on, but I can't tell what. It's not a life-changing dilemma, but I might be missing out on some great features!
Any ideas?
Synthbuilder
For the moment you have no great need for it since you don't currently have any input to the Oakley Bus. For example, from a midi-CV convertor or dedicated panel to send CV and gate to the Bus.

It may be worth having a read of page 6 and 7 of the Dizzy User Guide:

http://www.oakleysound.com/dizzy3-bg.pdf

Tony
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Page 1 of 1
Powered by phpBB © phpBB Group