3TrinsRGB-1c Triple CV Comparators - kits available

Discussion of modular and standalone video generating/processing techniques and associated hardware.

Moderators: lisa, luketeaford, Kent, Joe., daverj

Post Reply
User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

3TrinsRGB-1c Triple CV Comparators - kits available

Post by FetidEye » Wed Mar 16, 2016 1:30 pm

The new batch of 30 PCB's have arrived.

3TrinsRGB-1c 3x CV comparators PCB v3
What is a comparator:
Comparators in video processing are used for keying.
You can use the patchbay outputs of the 3trinsRGB-1c
and compare these to a voltage threshold.
You can set the bias / offset with the potmeter or by CV input signals.
The outputs will be a hard-edged versions of the initial image.

Each comparator has 1 signal input, 1 CV input, 1 bias potmeter and 2 outputs (positive and negative result)
The module is powered by the 3TrinsRGB patchbay. (HIGH and GND)
The PCB is compatible with the header patchbay of the 3TrinsRGB.

The module is designed to accept Eurorack CV voltages. (+10 volt envelopes and -5v +5v LFO signals)
The PCB has footprints for vertical 9mm potmeters and Thonkiconn jacks, so no wiring!

Want list nov 2016
dashiell23 1x kit
maggan 1x kit - shipped
jjplano 1x kit + panel - shipped
theflyingfridge 1x kit

PCB: 14,- euro
PCB + Eurorack panel (wood): 29,- euro
Full kit: 42,- euro
Full kit with wooden eurorack panel: 55,- euro
Build eurorack module: 90,- euro
All prices are with shipping included

PM me for orders or use my Etsy site:
(wigglers that order directly from me get discount)
https://www.etsy.com/listing/491010059/ ... e_active_1

[video][/video]
[video][/video]
[video][/video]
[video][/video]
[video][/video]
You do not have the required permissions to view the files attached to this post.
Last edited by FetidEye on Sun Nov 20, 2016 10:21 am, edited 252 times in total.

User avatar
sendhelp
Common Wiggler
Posts: 163
Joined: Fri Feb 20, 2009 12:04 pm
Location: PHL. USA.
Contact:

yup

Post by sendhelp » Wed Mar 16, 2016 1:45 pm

yes please

User avatar
sendhelp
Common Wiggler
Posts: 163
Joined: Fri Feb 20, 2009 12:04 pm
Location: PHL. USA.
Contact:

a

Post by sendhelp » Wed Mar 16, 2016 1:54 pm

kits would be great.
i'd probably make something similar to yours except w/ mini jacks instead of banana

User avatar
tenshun
Wiggling with Experience
Posts: 319
Joined: Fri Nov 06, 2015 3:40 pm
Contact:

Post by tenshun » Wed Mar 16, 2016 3:15 pm

count me in on one panel with vertical pots like how yours looks.

User avatar
sync24
Ultra Wiggler
Posts: 883
Joined: Tue Dec 28, 2010 2:44 pm
Location: Brighton

Post by sync24 » Wed Mar 16, 2016 3:33 pm

great!
could i take one of each layout, (one is for a friend) please?
thanks :sb:

User avatar
makers
Veteran Wiggler
Posts: 661
Joined: Wed Mar 20, 2013 1:54 pm

Post by makers » Wed Mar 16, 2016 8:38 pm

1 PCB with verticle pots for me please. Shipping to US.

Thanks

User avatar
Dirty_Bill
Ultra Wiggler
Posts: 896
Joined: Fri May 11, 2012 2:15 pm
Location: Alameda, The Island City

Post by Dirty_Bill » Thu Mar 17, 2016 2:23 am

2 right angle please, shipping to US

crowhurst
Common Wiggler
Posts: 66
Joined: Sun Jun 07, 2009 7:37 am

Post by crowhurst » Thu Mar 17, 2016 3:56 am

I'd like 1 vertical if possible,
shipping to Germany.Thanks :tu:

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Thu Mar 17, 2016 7:30 am

i'll PM those on the list this afternoon :)

reialex
Learning to Wiggle
Posts: 13
Joined: Thu Feb 05, 2015 7:38 pm

3x comparator for 3trins

Post by reialex » Thu Mar 17, 2016 1:29 pm

Am I still able to get on the list for one of these?

If so: Vertical, shipped to US

soulglo
Learning to Wiggle
Posts: 8
Joined: Tue Jul 07, 2015 5:42 am

3x comparator for 3trins

Post by soulglo » Sat Mar 19, 2016 11:47 am

one vertical (if possible a kit) for me please!!!

User avatar
Dirty_Bill
Ultra Wiggler
Posts: 896
Joined: Fri May 11, 2012 2:15 pm
Location: Alameda, The Island City

Post by Dirty_Bill » Sun Mar 20, 2016 11:18 pm

Thanks for the BOM!

cburst
Learning to Wiggle
Posts: 3
Joined: Tue Jul 16, 2013 8:38 pm

comparators pcb

Post by cburst » Mon Mar 21, 2016 4:48 am

i'll take a vertical/kit (if possible) please. i dont check here often, so if you could email to my username at gmail, i would be greatly appreciative.

User avatar
videowerkstatt
Learning to Wiggle
Posts: 8
Joined: Fri Jan 24, 2014 1:14 pm
Location: Darmstadt Germany

vertical pots

Post by videowerkstatt » Mon Mar 21, 2016 4:54 am

Count me in, if you do a kit, this would be preferred
thx hs

User avatar
evolve
Common Wiggler
Posts: 105
Joined: Tue Mar 17, 2015 8:43 am
Location: United States

Post by evolve » Mon Mar 21, 2016 6:15 pm

Excuse my ignorance, but what does a comparator do exactly?

kaeth
Learning to Wiggle
Posts: 7
Joined: Mon Feb 23, 2015 1:30 am

Post by kaeth » Tue Mar 22, 2016 3:47 am

I would happily take 1 vertical with a kit if available, and shipping to Canada. Thanks.

User avatar
johyde
Common Wiggler
Posts: 246
Joined: Wed Apr 23, 2014 1:43 pm

Post by johyde » Tue Mar 22, 2016 7:24 am

I'd like one with vertical pots please, shipping to the UK. Thanks for getting this together! :yay:

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Tue Mar 22, 2016 8:26 am

the vertical pot pcb is all gone. (see stock)
do you want a right angled one?

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Fri Mar 25, 2016 2:04 am

i've ordered almost all parts for the kits except the pots

User avatar
ebbflo
Common Wiggler
Posts: 51
Joined: Fri Jun 07, 2013 5:26 am

Post by ebbflo » Fri Mar 25, 2016 6:37 am

1xright angle please, s/h to US

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Fri Mar 25, 2016 6:13 pm

bom update:
Thanks tenshun!

i'm having a lot of fun patching.
the colors now : pink grey and green
it's also very nice to make cutout effects, edges .. amazing!
Last edited by FetidEye on Sat Mar 26, 2016 4:01 pm, edited 1 time in total.

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

build guide

Post by FetidEye » Sat Mar 26, 2016 1:23 pm

This is the BOM and BUILD GUIDE for the V1 PCB (non-cv)


A build guide for both PCB versions (with pictures!)

BOM's for both the vertical and the right angled version.


I've added some patch tips to the guide.
i've ordered a video capture device, so i can make some video patch examples later.

wobbly mirror patch (extended with 4 comparator channels)
Image

Image
You do not have the required permissions to view the files attached to this post.
Last edited by FetidEye on Wed Jun 08, 2016 5:19 am, edited 2 times in total.

User avatar
tenshun
Wiggling with Experience
Posts: 319
Joined: Fri Nov 06, 2015 3:40 pm
Contact:

Post by tenshun » Sat Mar 26, 2016 4:24 pm

awesome! i have to wait for my pots to arrive until i can start playing with it.
everything else is installed.

really excited :hyper:

User avatar
FetidEye
demonic space drone
Posts: 2088
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Sun Mar 27, 2016 8:37 am

good news.
a cv vactrol mod is easy

User avatar
djamsia
Learning to Wiggle
Posts: 30
Joined: Sun Feb 22, 2015 5:27 pm

djamsia

Post by djamsia » Sun Mar 27, 2016 7:46 pm

Hello

is possible one 3TrinsRGor B-1c 3x comparators PCB Vertical for me

Thanks!!

Post Reply

Return to “Video Synthesis”