WIGGLING 'LITE' IN GUEST MODE

[strat-1]

UPDATE : I updated all the kits. Because of the numerous requests I included the SMD pcb as a project. Please read the disclaimer below before buying.

Hi all

We are happy to announce that we successfully managed to accurately recreate in Euro format, the most sought after chorus from a famous analog polysynth from the eighties.
After a long period of redesign, build and tests we have a nice and great sounding DIY project we want to share with you, the 106 CHORUS.

This project is not exactly for beginners, but has the advantage that most of the parts needed are available at most parts distributors, the only rare/expensive parts are the BBD delay chips (MN3101 & MN3009) and the Toshiba 2SK30 FETs. These parts are still available and not hard to get.

We tried to make a comprehensive build document to make the whole DIY experience a joy. The document pack includes the builder manual, BOM list in xls and pdf format, pics with part values and photos of the construction in various stages. Feel free to download the whole pack and have fun.

SMD PCB Disclamer : Many people requested the SMD PCB and agreed I will not provide the project board, or layout transparency. This is a commercial product for me, so please do not insist.
The PCB have no part names, just the values, but as usual I wrote a comprehensive manual. If I provided no additional information on a subject or part information in bom, it means I considered you know what to do because this is an advanced project.
The SMD PCB is heavily tested, tens of boards were built. Please read the bom and manual before buying, to know all the details required for the project.

I'm not providing MN3009 for any kit.

KIT1 THT - front panel & PCB
KIT2 THT - front panel & PCB plus MN3101 (tested), 2x2SK30 fets, 3xMinijacks, 1x100KA pot, 1xCream Knob
KIT1 SMD - front panel & PCB
KIT2 SMD - front panel & PCB plus MN3101 (tested), 2x2SK30 fets, 3xMinijacks, 1x100KA pot, 1xCream Knob

price and stock :
all available at : www.feedbackmodules.com

KIT1 THT - 30eur
KIT2 THT - 43eur
KIT1 SMD - 30eur
KIT2 SMD - 43eur

SMD presoldered, beginners project available at Modular Addict :
http://modularaddict.com/manufacturer/feedback-modules/feedback-106cho rus-smd-pcbpanel

FULLY BUILT MODULE - 150eur
https://www.muffwiggler.com/forum/viewtopic.php?t=166892

Here are two demos of the module :

First demo is a simple sound from ambika to 106 Chorus.
(no chorus/chorus1/chorus2/no chorus/chorus1/chorus2)

[s]https://soundcloud.com/strat1/106-chorus-demo1-ambikato106[/s]

In second demo we used 2 System-X VCOs to 106 Chorus.
[s]https://soundcloud.com/strat1/106-chorus-demo-2-xvcoto106[/s]















Feeback projects you can build :

CP3+ Mixer :
https://www.muffwiggler.com/forum/viewtopic.php?t=158439
SmArTT verter :
https://www.muffwiggler.com/forum/viewtopic.php?t=158691
PRE CR :
https://www.muffwiggler.com/forum/viewtopic.php?t=163228
PRE BX :
https://www.muffwiggler.com/forum/viewtopic.php?t=163224
PRE KM :
https://www.muffwiggler.com/forum/viewtopic.php?t=163227

[strat-1]

Here are the kit options :

KIT1:



KIT2:



KIT3:



MN detail

[spneca]

I would like 2 KIT3, please.

[Reality Checkpoint]

Great sounds!

I would like 1 Kit 2 please.

Shipping to the UK.

[veets]

I would like a kit3 for USA shipping.

Thanks!

[pre55ure]

In for kit 3 in the US.

(Or kit 2 if you run out of stock on kit 3).

[PWM]

I'd like a kit 1 please!

[DomMorley]

One kit 3, or kit 2 if you've run out of those please!

[mikecameron]

PM'd for a kit 2!

[LektroiD]

How much for PCB only?

[grizzle]

I'd like 1 kit #3 please!

[mbroers]

im in for kit #3 or kit #2 if out of kit 3 stock. thanks!

[jfberma]

1 kit 3 for me please!

[kinrat]

Can I have a kit #2 please, if none left a kit #1, thank you.

[gianni]

I would like one KIT 2 shipping to Germany, please.

[LektroiD]

If I can't get PCB only, put me down for kit #1. I can always discard the panel, or just don't send it.

[jhulk]

i would like 1 kit 2 to uk

[keninverse]

2 of kit 2 please. US ship.

[sicpaul]

Love to get 1 Kit3 to Germany

[Zaibach]

Great stuff! I would love to have a KIT1, shipping to germany!

[horstronic]

Nice!
I'd like a kit 2!
Just one question: How deep is it? Seems like the PCB is pretty deep...

[audiohawk]

Great! Looking for something like this for a while.
I would like 1 kit 2 please... Or 1 kit 3 if the other not available
Thank you for your work

[chrissugar]

[fluffymuff]

Hi, not sure if any left but I'll be up for any kit that is still available, but given a choice i'd take kit 2 or 3, cheers!

[strat-1]