MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Solder pad come off sympleseq
MUFF WIGGLER Forum Index -> Hexinverter Electronique  
Author Solder pad come off sympleseq
BrianOShaughnessy
Hi all. I'm making the sympleseq and I made a big blobby solder on one of the pads for one of the .1uf caps, but I decided to snip it off with my small wire cutters, but I think the pad has actually come off also. I soldered the lead on to the pad on the component side. Does anyone know if this will be ok? Thanks guys. I feel like a right idiot!
MUFF WIGGLER Forum Index -> Hexinverter Electronique  
Page 1 of 1
Powered by phpBB © phpBB Group