MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

No sine coming from VCO controller
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Author No sine coming from VCO controller
ali_g12
After doing a a thorough calibration and redesigning the normalisation today i have decided to get to the bottom of this.

I can get a square wave out but no sine. Have checked my connections to the output PCB where the jacks are mounted and all appears OK.

Need a schematic to get a better idea. Suggestions of probable causes most welcome!
Synthbuilder
Schematic sent.

If you have no sine wave at pin 4 on the LWR header, check the components by the near left hand sides of U6 and U7.

Tony
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Page 1 of 1
Powered by phpBB © phpBB Group