MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Juno detuned after Juno-66 install
MUFF WIGGLER Forum Index -> Tubbutec  
Author Juno detuned after Juno-66 install
casiotone
Hi

So i've installed the Juno 66 chip, everything looks like it's working except the entire keyboard got permantely transposed ( C is now G#, C# is now A, etc).

This happens both on the Juno keyboard as in midi notes sent to the port.

Tunning is completely stable so this looks like the keyboard got transposed but transposition key is not accessible anymore?

How can i fix this, as this turns the keyboard mostly unusable.
Thanks
tubbutec
Never seen this problem before, but I suspect it has something to do with the pitch bend parts install.

Did you connect the red wire?

Can you post a picture of your installed pitch bend parts?

thanks
casiotone
Well, my tech just checked and it was some bad contact, it took 5 seconds to solve.

Sorry for this, it was our fault not a defect.
You can delete the thread.

Thanks for this absolutely amazing upgrade, i'm stunned
with all the functions.

Best
tubbutec
thanks for the update...

not going to delete the thread, it might be helpful for others
chuckfalcon
Hi guys, I just installed the Juno 66 in my Juno 60. Everything seems to be working "I think" except for one thing. When I turn the DCO up on the bender panel and move the bender left, the pitch sounds "glitchy" and the pitch of the note jumps around. What could this be?
tubbutec
chuckfalcon wrote:
Hi guys, I just installed the Juno 66 in my Juno 60. Everything seems to be working "I think" except for one thing. When I turn the DCO up on the bender panel and move the bender left, the pitch sounds "glitchy" and the pitch of the note jumps around. What could this be?


Sounds like a problem with the bender itsself. Is it possible that this problem was already there before the Juno-66 installation?
micah45456@hotmail.com
I just had the Juno 66 installed and the pitch if the notes is all messed up in Polymode. It's totally right in Duo and Mono mode. What could be happening?
micah45456@hotmail.com
Also, if I play a single note in Polymode it seems to have 6 different pitches that it plays in a series that repeats itself.[/video]
tubbutec
micah45456@hotmail.com wrote:
Also, if I play a single note in Polymode it seems to have 6 different pitches that it plays in a series that repeats itself.


Could be a problem with the connection between Juno-66 and the DCO divider ICs. I suggest to check the connections for shorts and open traces
MUFF WIGGLER Forum Index -> Tubbutec  
Page 1 of 1
Powered by phpBB © phpBB Group