||SH1oh1 vco calibiration
| br>Hi guys
After installing the sh1oh1 the SH is out of tune.
I must add i replaced the power switch.
Ive tuned more then 10 sh's in my life, for some reason i cant tune this one after the mode.
I get 5.1V from the cpu pin 40.
Can you please advise
Isak. br> br>
at which point during the tuning does it fail?
Please also try the following: Disconnect the green CV wire (pitch bend cv). Perform the tuning. Then reconnect it and perform the pitch bend calibration.
You can also put the original CPU back in - can you tune it now? br> br>
| br>thank you for fast reply.
sadly i can test only in the weekend.
i'll try what you suggest and update as soon as i can.
much appreciate the help.
have a great week
isak. br> br>
| br>Have another Q please.
The 2 resistors that located from the solder part of the cpu, should i remove them when replacing the cpu to the your cpu?