MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Modypoly / Polysex CV3
MUFF WIGGLER Forum Index -> Tubbutec  
Author Modypoly / Polysex CV3
pdub
Just got the Modypoly installed and gearing up for the Polysex install.

I've heard that CV3 can be used to control the Polysex spread. How exactly would this be done?

Thanks!
tubbutec
Here are the Polysex schematics. I marked additional parts for the spread control in red. Values are just suggestions, you will need to experiment a bit. The smaller the resistors, the bigger the maximum spread amount. The larger the capacitor, the better the filtering of the PMW signal.
With the values shown here the step response time is about 100ms, meaning the maximum modulation frequency when controlled via midi is in the range of 10-20Hz.
[/img]
pdub
Great thanks!!!
MUFF WIGGLER Forum Index -> Tubbutec  
Page 1 of 1
Powered by phpBB © phpBB Group