MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Juno 66 Filter Distortion
MUFF WIGGLER Forum Index -> Tubbutec  
Author Juno 66 Filter Distortion
choripain
hi,
i installed the CPU and now i´m having some problems with the filter.

when the filter is open the sound is clear, but when i´m sliding the filter fader down the signal gets crispy and distorted.
tubbutec
Hi,

did you install the orange filter cable? If so, could you post a picture of your soldering work?

Also post pictures of your installed Juno-66 and the underside of the CPU socket.

If you can, put back the original CPU and see if the problem persists.
tubbutec
In your deleted post you stated, that you used the red cable instead of the orange one to control the filter. Yes this is most certainly the reason for your problem. The red cable is for pitch bend control. (As stated in the installation manual)
choripain
sorry... grin

but maybe it is good that now the people how did the same dumb mistake can find it in the forum... smile
MUFF WIGGLER Forum Index -> Tubbutec  
Page 1 of 1
Powered by phpBB © phpBB Group