MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[SH-1oh1] Pitch bend issue
MUFF WIGGLER Forum Index -> Tubbutec  
Author [SH-1oh1] Pitch bend issue
goldplate
Hello,

I just installled the mod a few days ago and I have a few somewhat issues.

One is that as soon as I send a MIDI pitchbend message it works, but when the value come back to zero the pitch is out of tune of about half a tone.

Please tell me if you know what I could do to resolve this.
tubbutec
Hi,

this bug has been fixed in firmware version 1.7 you can update here:
https://tubbutec.de/tubbutec-firmware-updater/

After the update if the pitch is off you need to perform a pitch bend calibration once. See installation manual for details.
goldplate
Oh yes, just noticed it.

But I haven't been able to perform the update. I tried 3 or 4 different MIDI/USB interface, always time out.
goldplate
Oh yes, just noticed it.

But I haven't been able to perform the update. I tried 3 or 4 different MIDI/USB interface, always time out.
tubbutec
Did you connect midi input AND output?
Does the 'Check firmware' Button work?
Is midi working in other Software?
goldplate
Yes, no and yes. Next thing I will try with another computer...
goldplate
Failed.

I will buy another MIDI/USB interface.
goldplate
I bought a Midiman Midisport 2x2 and the update worked flawlessly !

The failed attempts were done with a cheap USB/MIDI interface like this, a Sequentix Cirklon and a MOTU MIDI Express XT USB.
tubbutec
Thanks for the feedback. Will try to test it with the interfaces you mentioned and try to find the reason for it failing
MUFF WIGGLER Forum Index -> Tubbutec  
Page 1 of 1
Powered by phpBB © phpBB Group