Klavis Twin Waves

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: luketeaford, Joe., lisa, Kent

Post Reply
User avatar
scottmoon
Super Deluxe Wiggler
Posts: 2026
Joined: Mon Oct 28, 2013 10:11 pm
Location: Sierra Foothills
Contact:

Post by scottmoon » Sun Mar 19, 2017 4:03 pm

Sounds perty :tu:
"If you think this world is bad, you should see some of the others" - PKD

My band's noise https://soundcloud.com/lunarasylum

Mercutio
Ultra Wiggler
Posts: 802
Joined: Mon May 10, 2010 7:14 am
Location: Belgium

Post by Mercutio » Sun Mar 19, 2017 4:15 pm

Thank you guys !

Here a demo of the Supersaw

Oscillo 1 = supersaw (spread driven by Oscillo 2)

Oscillo 2 = LFO ( Sine in Sync mode- manually tweaked +++slower divisoon to highr multiplication by hands)) => Oscillo 1 and filter


Osicllo output 1 go to Korga

I introduce Modcan Dual LFO in the second part

Twin Waves supersaw
Last edited by Mercutio on Sun Mar 19, 2017 4:59 pm, edited 1 time in total.

User avatar
lohacker
Veteran Wiggler
Posts: 738
Joined: Sat Oct 01, 2011 6:48 am

Post by lohacker » Sun Mar 19, 2017 4:26 pm

Nice and crisp supersaw here, thanks again Mercutio :hail:

Mercutio
Ultra Wiggler
Posts: 802
Joined: Mon May 10, 2010 7:14 am
Location: Belgium

Post by Mercutio » Mon Mar 20, 2017 6:43 am

Here 2 demo with Analog Rytm.

I change algo by hand (in waiting META MODE ?), beat = Analog Rytm (Sorry for the poor mix...again)

Moving thru algo (Beat = Analog Rytm)

Some beats (Analog Rytm) and bassline (Twin waves + SSF Pole ZERO)+ fx (Twin waves + SSF MMF) (Sorry for the poor mix...again)

Jam with Analog Rytm

User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Mon Mar 20, 2017 7:23 am

Mercutio wrote:I change algo by hand (in waiting META MODE ?)[
OK OK... understood ! :hihi:
You're not the first, and likely not the last one asking for it.
So, CV control of algo selection will be in the next update :party:

No need to postpone your acquisition: firmware updates are done via a simple audio file.
Klavis
Fine Modular Designs

User avatar
Pighood
Super Deluxe Wiggler
Posts: 2042
Joined: Fri Sep 14, 2012 8:48 pm

Post by Pighood » Mon Mar 20, 2017 12:56 pm

A word of advice chaps: make sure to have the module sent to a SECURED location; my Amazon parcel was stolen from my front porch this morning.
*phnert*

Mercutio
Ultra Wiggler
Posts: 802
Joined: Mon May 10, 2010 7:14 am
Location: Belgium

Post by Mercutio » Tue Mar 21, 2017 5:07 am

Bad news,

Doesn't Amazon deliver in hands ? Check with them !

User avatar
Pighood
Super Deluxe Wiggler
Posts: 2042
Joined: Fri Sep 14, 2012 8:48 pm

Post by Pighood » Tue Mar 21, 2017 10:10 am

Update: Amazon's delivery service is staffed by monkeypotatoes. After all that aggravation, I came home from work later in the evening and guess what was sitting on my welcome mat.

Word of advice to the aforementioned bonobospuds: DON'T MARK A PARCEL AS DELIVERED UNTIL YOU FUCKING DELIVER IT.

Now she sits in my P9 thusly:

Image

As for the anticipatory :fap: :fap: :fap: :fap: :fap:

I assure you, it's well warranted.

:fap:
*phnert*

Mercutio
Ultra Wiggler
Posts: 802
Joined: Mon May 10, 2010 7:14 am
Location: Belgium

Post by Mercutio » Tue Mar 21, 2017 10:21 am

:yay:

Good nexs ! Enjoy this little beast !....

User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Tue Mar 21, 2017 10:52 am

Pighood wrote: Word of advice to the aforementioned bonobospuds: DON'T MARK A PARCEL AS DELIVERED UNTIL YOU FUCKING DELIVER IT.
:lolsign:
Had a good laugh!

Enjoy your new module.
Thanks
Klavis
Fine Modular Designs

User avatar
doskonale
Learning to Wiggle
Posts: 43
Joined: Mon Apr 21, 2014 2:29 am
Location: Brussels

Post by doskonale » Fri Mar 24, 2017 12:51 am

I really love this dual OSC by Klavis.

I was at the release party and got to spend some time with it. I also had a demo from the designer himself (thanks Zentek !).

The price/performance/features/HP ratio is just fantastic, IMHO.

I love the vectors and the noise waveforms.

I also have their Logic module, which is small and very handy (touch button, flip flop, and cv control of the logic operations). No thread on Muff at the moment. Might post something when the time comes.
to be a sprinkler system in a thunderstorm

User avatar
starthief
Super Deluxe Wiggler
Posts: 4430
Joined: Tue Oct 04, 2016 10:39 am
Location: St Louis, MO
Contact:

Post by starthief » Sun Mar 26, 2017 11:00 am

Zentek wrote:
Pighood wrote:How to obtain in the USA? Website says available through Amazon only....no listing.
After some delay, our modules are available in the US and Europe :banana:
http://www.klavis.com/index.php/buy
Any idea when they'll be back in stock in the US? Unfortunately the European Amazon stores don't deliver to the US.

User avatar
Zymos
Super Deluxe Wiggler
Posts: 2565
Joined: Sat Jul 18, 2015 1:14 pm
Location: ABQ,NM

Post by Zymos » Sun Mar 26, 2017 4:37 pm

Until they perfect their delivery drones, if someone screws up with delivery, it's not Amazon's fault, it's the carrier's.
And beyond that, they are usually willing, with no hassle, to send a replacement if you tell them something was lost or stolen.

User avatar
Pighood
Super Deluxe Wiggler
Posts: 2042
Joined: Fri Sep 14, 2012 8:48 pm

Post by Pighood » Sun Mar 26, 2017 6:18 pm

Zymos wrote:Until they perfect their delivery drones, if someone screws up with delivery, it's not Amazon's fault, it's the carrier's.
And beyond that, they are usually willing, with no hassle, to send a replacement if you tell them something was lost or stolen.
I will testify to this. Shoddy lazy carrier. Amazon sent a replacement before I took delivery of the original order, and it should be back in their warehouse by now.
*phnert*

kriskeyman
Common Wiggler
Posts: 96
Joined: Sun Nov 22, 2015 2:29 am

Post by kriskeyman » Sun Mar 26, 2017 7:50 pm

Where do I buy this module? Amazon link on website shows unavailable.

Mercutio
Ultra Wiggler
Posts: 802
Joined: Mon May 10, 2010 7:14 am
Location: Belgium

Post by Mercutio » Mon Mar 27, 2017 2:56 am


User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Mon Mar 27, 2017 9:42 am

kriskeyman wrote:Where do I buy this module? Amazon link on website shows unavailable.
Yes. There's a shortage.
It will be available again in a few days.
Thank you for being patient.
Eric
Klavis
Fine Modular Designs

User avatar
cliffemu
Veteran Wiggler
Posts: 573
Joined: Thu Feb 16, 2012 12:00 pm
Location: NYC
Contact:

Post by cliffemu » Thu Mar 30, 2017 8:13 pm

Zentek wrote:
Mercutio wrote:I change algo by hand (in waiting META MODE ?)[
OK OK... understood ! :hihi:
You're not the first, and likely not the last one asking for it.
So, CV control of algo selection will be in the next update :party:

No need to postpone your acquisition: firmware updates are done via a simple audio file.
How do you think you'll implement the meta mode? If somehow there was a way to change algos while still having CV control of the 2 params that would be really ace. Just curious.

User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Fri Mar 31, 2017 2:58 am

cliffemu wrote:
Zentek wrote:
Mercutio wrote:I change algo by hand (in waiting META MODE ?)[
OK OK... understood ! :hihi:
You're not the first, and likely not the last one asking for it.
So, CV control of algo selection will be in the next update :party:

No need to postpone your acquisition: firmware updates are done via a simple audio file.
How do you think you'll implement the meta mode? If somehow there was a way to change algos while still having CV control of the 2 params that would be really ace. Just curious.
It would be implemented as an alternate use of the FM jack.
Klavis
Fine Modular Designs

User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Fri Mar 31, 2017 8:49 am

Zentek wrote:
kriskeyman wrote:Where do I buy this module? Amazon link on website shows unavailable.
Yes. There's a shortage.
It will be available again in a few days.
Thank you for being patient.
Eric
Back in stock ! :tu:
Klavis
Fine Modular Designs

kriskeyman
Common Wiggler
Posts: 96
Joined: Sun Nov 22, 2015 2:29 am

Post by kriskeyman » Sat Apr 01, 2017 2:44 am

...and ordered! :75:

User avatar
chapelier fou
Ultra Wiggler
Posts: 897
Joined: Sun Oct 27, 2013 11:07 am

Post by chapelier fou » Tue Apr 04, 2017 11:23 am

Does anyone noticed inconsistencies when using the quantizer ?
I am talking about glitches and what seems to be missed notes at reasonably high speeds.

User avatar
Zentek
Common Wiggler
Posts: 224
Joined: Tue Jun 16, 2015 5:15 pm
Location: Belgium
Contact:

Post by Zentek » Tue Apr 04, 2017 12:15 pm

chapelier fou wrote:Does anyone noticed inconsistencies when using the quantizer ?
I am talking about glitches and what seems to be missed notes at reasonably high speeds.
We got feedback about some users getting instability with the quantizer.
We can't tell if it's due to the source voltage being noisy or via the supply or what else. We didn't get that here; maybe because our setup is more modest than most. :-)
Don't worry, we're on it and a firmware release will come in a few days.
Sorry for the trouble and thank you for reporting.

Eric
Klavis
Fine Modular Designs

User avatar
chapelier fou
Ultra Wiggler
Posts: 897
Joined: Sun Oct 27, 2013 11:07 am

Post by chapelier fou » Tue Apr 04, 2017 12:30 pm

Many thanks.
That's an awesome module you've made there !

User avatar
rustyjaw
Common Wiggler
Posts: 239
Joined: Thu Nov 05, 2015 6:36 pm
Location: SF Bay Area
Contact:

Post by rustyjaw » Tue Apr 04, 2017 12:48 pm

Man this thing looks so nice, great features for a very reasonable price.
Synth Enthusiast | Abandonment Photographer

Post Reply

Return to “Eurorack Modules”