MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Stillson Hammer mkii clock expander idea
MUFF WIGGLER Forum Index -> The Harvestman  
Author Stillson Hammer mkii clock expander idea
Xssory
You know what I think would be an incredible expander for this sequencer - a 2hp module with a separate clock and reset input for each channel. Just 8 jacks and that's it. I feel like this would open up a ton of functionality for creatively clocking the 4 channels to create patterns much longer than "16x16th notes" but without committing all 4 channels to the same clock.

In fact, maybe the clock and reset of each channel would still be normal'd to the master clock/reset (internal or external) if nothing is plugged into a channel clock/reset input?

This is the only functionality I can see missing from this guy!
mt3
Xssory wrote:
You know what I think would be an incredible expander for this sequencer - a 2hp module with a separate clock and reset input for each channel. Just 8 jacks and that's it. I feel like this would open up a ton of functionality for creatively clocking the 4 channels to create patterns much longer than "16x16th notes" but without committing all 4 channels to the same clock.

In fact, maybe the clock and reset of each channel would still be normal'd to the master clock/reset (internal or external) if nothing is plugged into a channel clock/reset input?

This is the only functionality I can see missing from this guy!


Ya, I was hoping for independent CV/gate tracks as well.

Don't forget 8 more assignable controllers for the expander as well!
Baddcr
Yes please smile
RGB
....
weirdo
+1, small hp-sized expander with additional cv & clock outs and shuffle+swing modes please (or implement the shuffle+swing on the shmk2 firmware).
MUFF WIGGLER Forum Index -> The Harvestman  
Page 1 of 1
Powered by phpBB © phpBB Group