MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Plague Bearer DIY discussion
MUFF WIGGLER Forum Index -> Flight of Harmony  
Author Plague Bearer DIY discussion
flight
For those who haven't seen it, there's a discussion regarding f(h) offering a full DIY kit (or just the PCB/panel/etc.) of the Plague Bearer over here.
The preliminary designs for the PCB and panel are up and I'm looking for as much feedback as I can get!
HARGOW
Question about the dual input and dual outputs. There is a summing mode and a multiple mode. Just curious on the application of each mode to the dual input and outs, since the inputs seem to get mixed before getting mangled in the filter.
flight
HARGOW wrote:
Question about the dual input and dual outputs. There is a summing mode and a multiple mode. Just curious on the application of each mode to the dual input and outs, since the inputs seem to get mixed before getting mangled in the filter.
It was a specific request from a few people in the PB Kit thread. There was concern about potential damage to modules if their outputs or inputs were multed together. The summing mode simply places resistors between the jacks of whatever modules are being connected. The only effect they have on the PB itself is to reduce the signal level coming in or going out.
MUFF WIGGLER Forum Index -> Flight of Harmony  
Page 1 of 1
Powered by phpBB © phpBB Group