MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Northern Light Modular - Dual CV Polymorpher Model 2OC
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge Goto page 1, 2, 3  Next [all]
Author Northern Light Modular - Dual CV Polymorpher Model 2OC
Synesthesia
Hi!

We have received our panel - and are now ready to build and ship smile

Price for a a fully finished and calibrated unit is 750 euros with a part of the profit going to Mxmxmx - plus shipping fee. We are looking at sending the modules fully insured.

we have stock of pcb, parts and panels - so we can build to order.

The module is compatible with Buchla Voltages and Power (EDAC connector ) .

Thanks again to Patrick Dowling, mxmxmx, and Tim Churches for this awesome module.

https://www.modulargrid.net/u/northern-light-modular-dual-cv-polymorph er-model-2oc

More Info on Ornement-and-crime here: http://ornament-and-cri.me/
The 2OC support has just added to the master O&C firmware code. This means that bug fixes and enhancements for the eurorack O&C firmware will be immediately available for the Buchla 4U version as well.





meatcliff
helllll yeah!
BaloErets
I could have sworn that porn was not allowed on this forum hyper

What a beauty it is!
Drillionaire
This looks amazing!

Will there be PCB and panel sets available?
Citisyn
Awesome! When will you be taking orders?
Synesthesia
Citisyn
We can take orders as of right now smile

Drillionaire - Hey Drillionaire - maybe but no ETA yet - we only have a few PCB's an panels, so we need to see if we have spares and / or need to order more .
Citisyn
Synesthesia wrote:
Citisyn
We can take orders as of right now smile

Drillionaire - Hey Drillionaire - maybe but no ETA yet - we only have a few PCB's an panels, so we need to see if we have spares and / or need to order more .


So, how do we order?
Synesthesia
We don't have an online shop yet, but we have a paypal setup already - send me your location in MP, and I will check the shipping options.

Marc smile
Drillionaire
Synesthesia wrote:
Drillionaire - Hey Drillionaire - maybe but no ETA yet - we only have a few PCB's an panels, so we need to see if we have spares and / or need to order more .


I would definitely be interested in a set if you have any extras or do another order thumbs up
APETECHNOLOGY
beautiful work! we're not worthy

i am also interested in a pcb and panel set if they become available .
building my new toy is part of the fun for me!
again, well done.
kashmir
Looks amazing!! Also interested in PCB+panel if there would be order for that, building is fun This is fun!
Leoespejo
Come on guys... a demo and and some explanation about features could help.


A lot of new buchla third party projects around there, demos help to decide.
bsilverberg
kashmir wrote:
Looks amazing!! Also interested in PCB+panel if there would be order for that, building is fun This is fun!


Building is Fundamental!! smile
meatcliff
Leoespejo wrote:
Come on guys... a demo and and some explanation about features could help.


A lot of new buchla third party projects around there, demos help to decide.


There's full docs on O+C here.... should be some pretty extensive threads in the general modular or euro forum too:

http://ornament-and-cri.me/user-manual/#overview
cyberdine
I'm in! Having some trouble sending private messages on the forum -- is there another way I can contact you?
ArguZ
https://www.facebook.com/NorthernLightModular/
Synesthesia
Hey all - i was out of the country for a couple of days - i think i came back to everyone who sent a PM - let me know if not smile
Synesthesia
Hi all,

all modules from the first run have been spoken for.

We had 10 units, and sold 10 - most of them are now built, and the first batch is shipping out today or tomorrow.

Sascha and Mxmxmx worked hard over the last few days and perfected the firmware.

If ever you want a module from the next run, let me know, and i'll add you to the waiting list.
Synesthesia
Our website is live!

we have ordered a few more panels and pcb - and will be focusing on our next modules - but pre-orders are possible through the site smile
CLICK HERE! http://northernlightmodular.com/
Drillionaire
Are you going to offer extra panels and PCBs to people interested in DIY?
If not, will you post the Eagel schematic and board files so people can order their own PCBs?
Synesthesia
Hey Drillionaire,

We probably will offer some PCB and panels set - preferably through Modular Addict ( John is the man! ) but not for a while.

At the moment, we are getting our pcb and panels in little batches, and don't have many to spare. Those ain't cheap wink

As for the files - there is no real plans to release our eagle files. We posted the schematics, which incl. all the needed modifications we did, so there is no secret there - feel free to make your own pcb.

Marc
Synesthesia
We could release the Gerber files, but they will need some adaptation... ( as it is, the marking on the board is for us... with serial number etc) - we will speak to Max for guidance.
Synesthesia
Website is updated - we shared the 2 O_c files for the DIYers smile

Check the site smile
cygmu
Fair play -- well done! applause applause applause
ArguZ
Also interesting for existing customers, we updated the FW to 1.3.2
If you got one of the first batch, update to 1.3.2 for
a fix for 4xLFO phase spread behaviour
adds: cross-channel amplitude modulation, misc. CV destinations (via CV4), frequency multiplication/division (via TR4) [all in 4xLFO]

and here is how to :

step 1): install the Teensy Loader program
the Teensy Loader is available at https://www.pjrc.com/teensy/loader.html

step 2): download the binary HEX file
download the latest released version of the 2OC firmware image file (.hex) from https://drive.google.com/file/d/0B6esg96sRxG6MngzeXkxYktGUWs/view?usp= sharing

step 3): open the HEX file in the Teensy Loader
open the HEX file in the Teensy Loader application
make sure a USB cable is connected to one of the Teensies , and that the 2OC module is powered up
click the green Auto Program icon, or choose Program from the Operation menu in Teensy Loader
press the program push switch on the Teensy board
(you should briefly see a progress bar as the firmware is uploaded)
click the reboot icon or choose Operation > Reboot
your 2OC should now run the updated firmware (resp. come to life, if newly built)
It will say "2OC 1.3.2" in the start screen indicating that the upgrade worked fine
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge Goto page 1, 2, 3  Next [all]
Page 1 of 3
Powered by phpBB © phpBB Group