MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Disting mk3 problem
MUFF WIGGLER Forum Index -> Expert Sleepers  
Author Disting mk3 problem
pynchy
I'm having an issue with my mk3, when I power on the start up led sequence will run but then all ​the led​s​ stay fully on or maybe flashing at audio rate. If I power on but hold the knobs it will go to the upper two led flashing but with no way to exit this.​ I tried updating the firmware to latest release, this process runs fine and confirms firmware has updated but I reboot the same thing happens... all the leds stay lit.​

Any help would be appreciated.

I have sent this to expert sleepers as well but it hought i might as well try here also.

:(
os
Replied to your email.
wiwwah
I've also had this happen with my MK3 today. Was all fine yesterday but when I turned it on all LED's were flashing. Tried another firmware update which worked perfect then did the same after a reboot. Is there a fix for this?

Thanks
os
Only in hardware. Email me.
wiwwah
os wrote:
Only in hardware. Email me.


Done smile
Sleipnir
os wrote:
Only in hardware. Email me.

Mine is doing this now as well.
Is it really a return/repair, or something I can do here?
os
It's a repair.
GGeb
os
Hello there,

today when I switched on my system my mk3 had the 'all leds on' problem which has never had before.

After some rebootings, now I can change alghoritms and everything but it is actually not playing anything, not input or output are actually working.

how can I fix this?

thank you
os
Please don't post the same thing twice.

https://www.muffwiggler.com/forum/viewtopic.php?t=206211
MUFF WIGGLER Forum Index -> Expert Sleepers  
Page 1 of 1
Powered by phpBB © phpBB Group