MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

ES-40+ESX-8CV - Clock & Voice in one module
MUFF WIGGLER Forum Index -> Expert Sleepers  
Author ES-40+ESX-8CV - Clock & Voice in one module
Silicium
olla,

I would like to use 1/2 for Clock/Sync and 3/4 5/6/ 7/8 for Voice.

my current setup is:


Sync -----------,
Voice :---> Combiner ----> Spdif out
Voice ----------ˆ
voice ----------ˆ

Voice tracks to Combiner
Sync to Combiner
Combiner to interface

my problem now is, i'am unable to assign all the channels.
when i select the combiner track i have only 3 channel pairs so i can only assign 2 voice and 1 sync.


please help me!
os
Assuming you’re in Live, the first channel pair is “Track In”.
Silicium
i tried that but it didnt worked, but i will test it again ;)

thx!
Silicium
One more Question:

if i add a esx-8gt module,
would there be a way to use 8 CV channels on the 8cv and the 8 gate channels on 8gt together? or would you recommend to get another 8cv module?
os
Yes, you can use both together.

The key thing in Live, because of a bug in Live that limits the number of plug-in inputs to 8, is to put the ESX-8CV Combiner first on the track.
Silicium
Ah, thats the reason, i was wondering why this is so complicated!

thx!
MUFF WIGGLER Forum Index -> Expert Sleepers  
Page 1 of 1
Powered by phpBB © phpBB Group