FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 

noob guidance
MUFF WIGGLER Forum Index -> Expert Sleepers  
Author noob guidance
been an es3/es6/es8 user for a while now, but have only used it to record and play back cv.

now im looking to have 6 specific frequencies coming out of six outs of the es8, each one an interval of 432hz. and to be able to control the volume via cv inputs on the es6, using analog offsets created on the modular.

im just not sure the best way to go about it, should i just use silent way LFO for the frequencies? do they go high enough?

the manual for silent way confuses me in regards to cv input, i dont really need to use a vca for each cv input channel on the es8 do i? it seems like the manual was written before the es3/es8, unless you always need to use an external vca or the es2 when doing cv input, i hope not.. anyone?
SW LFO seems like a good place to start.

You don't need to use SW CV Input. That's for when you don't have DC coupled inputs.
MUFF WIGGLER Forum Index -> Expert Sleepers  
Page 1 of 1
Powered by phpBB © phpBB Group