Juno-66 Program change

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
Common Wiggler
Posts: 198
Joined: Sun Sep 01, 2013 9:21 am
Location: NYC

Juno-66 Program change

Post by warmtape » Tue Jan 09, 2018 11:15 am

I'm hoping to get a quick clarification: are proper program changes possible between different saved presets?
the manual is a little confusing to me in that i'm not sure if it's solely for "Play Mode" or not. can someone clarify, please? many thanks

"The Juno-66 responds to program change commands and changes the play
mode. It also sends program change commands when changing the play
mode. The following table shows which program number corresponds with
which play mode:"

User avatar
Veteran Wiggler
Posts: 643
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin

Post by tubbutec » Wed Jan 10, 2018 1:14 pm

It is not possible to change the path of a juno-60. Juno-66 does not have access to the sound parameters.

Instead the program change message is used to change the play mode (poly, 2 voice, mono, chord, etc..)

Post Reply

Return to “Tubbutec”