Juno 66 additional CV

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
pechnatunk
Learning to Wiggle
Posts: 14
Joined: Wed Jan 13, 2010 12:00 am
Location: Londondondon

Juno 66 additional CV

Post by pechnatunk » Tue Feb 13, 2018 10:24 am

Hi,

I'm 99% I'm buying this mod.
I will be paying for it to be professionally installed.

I was just looking through the Juno 66 Manual. And saw in the MIDI implementation there are two additional optional CV controllers:


21 CV2 (if installed) 0-127
22 CV3 (if installed) 0-127


Can someone please tell me what these would be used for?
I'd like to know if I need/would like them installed so I can get a more accurate quote.

Thanks.
Vic.

User avatar
tubbutec
Veteran Wiggler
Posts: 661
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Tue Feb 13, 2018 11:23 am

Hi,

CV1 is used for the filter, (installation described in the manual)
CV2 is used for pitch bend (installation described in the manual)
and CV3 is not used.

pechnatunk
Learning to Wiggle
Posts: 14
Joined: Wed Jan 13, 2010 12:00 am
Location: Londondondon

Post by pechnatunk » Wed Feb 14, 2018 8:59 am

OK Thanks for that!
Also, just another thought.
If the Pitch control is installed - will this also output pitch bend midi data? when using the as played channel?

Cheers,
Victor.

User avatar
tubbutec
Veteran Wiggler
Posts: 661
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Wed Feb 14, 2018 9:39 am

pechnatunk wrote:OK Thanks for that!
Also, just another thought.
If the Pitch control is installed - will this also output pitch bend midi data? when using the as played channel?

Cheers,
Victor.
no

pechnatunk
Learning to Wiggle
Posts: 14
Joined: Wed Jan 13, 2010 12:00 am
Location: Londondondon

Post by pechnatunk » Thu Feb 15, 2018 6:24 am

Well, I'm still excited :)

Thanks!

Post Reply

Return to “Tubbutec”