MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Trouble sequencing Dominion 1 through CV/Gate
MUFF WIGGLER Forum Index -> Modular Synth General Discussion  
Author Trouble sequencing Dominion 1 through CV/Gate
flextone
Hi,

This is just another one of those "the gate won't trigger" questions, but a bit odd.

I'm running the cv/gate out of my x0xb0x (x0xio) to the dominion 1, and it works fine until I speed up the sequencer. From a certain speed it is as if some notes stop triggering until eventually they all become silent. It's as if the gate is too short to trigger the envelope or becomes weaker somehow as speed increases.

What's going on here? Please don't tell me I need extra modules between the two units.
flextone
I'm guessing it's the Gate length that's the problem. The xox gate might be too long, and from a certain speed starts to overlap. Any idea how to solve this without opening up the xoxbox?

Cheers
MUFF WIGGLER Forum Index -> Modular Synth General Discussion  
Page 1 of 1
Powered by phpBB © phpBB Group