MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Verbos Multi Delay Processor
MUFF WIGGLER Forum Index -> Eurorack Modules  
Author Verbos Multi Delay Processor
Tumulishroomaroom
Just a thread to talk about this wonderful module, share patching tips, videos and audio.



Here's a few I nicked from the main Verbos thread to start with :

thetwlo wrote:
quick thing today with the Verbos HO and Verbos Delay into the MN RxMX, no other effects, VCFs..., WMD PDO for modulation of RxMx:
https://soundcloud.com/user-931889590/verbios-ho-delay-rxmx


Tumulishroomaroom wrote:

Three instagram snippets :
https://www.instagram.com/p/BouDmzvBwre/?taken-by=l.marchal

https://www.instagram.com/p/BoxHcyhBUL9/

https://www.instagram.com/p/Bo1jtNlBdjw/



Tumulishroomaroom wrote:
The Multi Delay Processor might be my favorite module I ever got... It is sooooo much more than a delay. I love it. It's just impossible not to tweak it in every way... and it sounds incredible all the time.

Here's a live jam I did this weekendI use it a lot during the intro but it is also sparkled throughout for leads, and ambiances, and the outro as well...



BrokenBo wrote:
harmonic oscillator, multi delay processor in this little patch here:

https://soundcloud.com/bo-deep/universal-control-voltage


BrokenBo wrote:
some techno/ house minimal stuff with verbos CO and HO for bassline / melody. multi delay processor also doing some work.

https://soundcloud.com/bo-deep/vienna98


The Junglechrist wrote:
Hey there ! Here is a new Patch From Scratch using the Verbos Multi-Delay as a weird Chorus effect :



Feel free to add more and share !
kingcons
I cracked and ordered from Perfect Circuit yesterday. Hopefully someone will take my Akemie's off my hands to ease the pain in my wallet!

Looking forward to sharing video/reflections soon... smile
The Junglechrist
Cool to have this dedicated thread.

I'll had this video by Voltlife that I would have done if he didn't beat me to it :

Tumulishroomaroom
kingcons wrote:
I cracked and ordered from Perfect Circuit yesterday. Hopefully someone will take my Akemie's off my hands to ease the pain in my wallet!

Looking forward to sharing video/reflections soon... smile

Please do when you get it !

The Junglechrist wrote:
Cool to have this dedicated thread.

I'll add this video by Voltlife that I would have done if he didn't beat me to it :


Yeah it's a great one and one of my favorite thing to do with the delay as well !
murch33
I wish I could spare the HP for it. waah
The Junglechrist
Here is the video we did as Wired Brain with the Multi Dela, I use it a lot for this kind of effect :

damase
I too am loving this module. Ive never had a delay that i can use like this one. Its a nice warm sound. So glad it has 2 cv inputs because audio rate fm is my jam. It really does intertwine itself into a patch much more than any other effect ive used. No sounds to post because all my recordings have been so good they are making it to my future tracks

Ill comment though and say that it starts to get a little noisy toward the longer end of the time knob, from about 3-5oclock. I think its just part of the modules design. Its not an unpleasent noise at least, and it can even be useful when being fm’d for a cool dirty kinda sound. Overloading the inputs gain is a useful distortion source too

Kinda wish there was a scan/width for the mix output like some other verbos modules, seems like that would be super cool here but i guess its purely wishful at this point
jmax313
I have a rainmaker already but have lusted over this delay. Anyone with both or who have used both at some point care to offer their thoughts on both modules?
damase
jmax313 wrote:
I have a rainmaker already but have lusted over this delay. Anyone with both or who have used both at some point care to offer their thoughts on both modules?

I have both and i love both.
Completely justified for having both. They sound very different, they are very different in usage/patching, and they have very different end results.

I use the multidelay in a system that had a lot of analog patching, fm intertwining and feedback modulations
The rainmaker i use as a sound design and performance tool, its more of a system in itself
Voggg
I absolutely love the sounds coming out of it in every demo and track I've heard so far. And the followers. That said, I'm puzzled by the lack of a clock input / tap tempo. There's a tension that hasn't been fully resolved yet between the very analog Verbos design ethos and the feature sets / options users expect from a digital module.
Based on sound characteristics, I would choose this over Rainmaker; based on features and utility I'd choose the latter. Fortunately I already have a few great delay modules, so I'll be content listening to what other people come up with in this thread.
Tumulishroomaroom
jmax313 wrote:
I have a rainmaker already but have lusted over this delay. Anyone with both or who have used both at some point care to offer their thoughts on both modules?

damase has answered very well already but I also have both and use both all the time. They are very complimentary and each du stuff than the other isn't capable of. The Multi Delay Processor has more of a sound of its own, and has the great advantage of being very tactile; it's not a set and forget module, you play it. The pitchifting and reverb lead you to great washes of ambiance and are very useful for sound design. Like Mark Verbos says himself it's not an end of chain delay, it's a delay that's an integral part of your voice.



Voggg wrote:
I absolutely love the sounds coming out of it in every demo and track I've heard so far. And the followers. That said, I'm puzzled by the lack of a clock input / tap tempo. There's a tension that hasn't been fully resolved yet between the very analog Verbos design ethos and the feature sets / options users expect from a digital module.
Based on sound characteristics, I would choose this over Rainmaker; based on features and utility I'd choose the latter. Fortunately I already have a few great delay modules, so I'll be content listening to what other people come up with in this thread.

I don't mind the lack of clock input really; I think it's good to have a delay that is not in perfect sync sometimes. And once again it's not like a tape delay with endless repeats, it's rather short delays that help you mangle/create a sound (which you can put through a classic delay afterwards).
natureclubcassettes
maybe this has been addressed elsewhere, but what is the relationship between the multi delay and Mark's 288v Buchla module? the 288v seems to lack all the followers but has a few more CV inputs...
Tumulishroomaroom
natureclubcassettes wrote:
maybe this has been addressed elsewhere, but what is the relationship between the multi delay and Mark's 288v Buchla module? the 288v seems to lack all the followers but has a few more CV inputs...



This video covers the relationship between the two modules and a fair bit more. It's rather interesting !


Link : https://vimeo.com/267984409
natureclubcassettes
awesome! thanks!
BrokenBo
i had the rainmaker and currently own the verbos delay. rainmaker on paper has more features but in practice i much preferred the sound and interface of the verbos delay.

verbos interface is very inviting for tweaking and experimenting and the feedback possibilities are great. to me this module is very "modular" and interacts quite well with other modules in my system (random sources, filters, oscillators for fm etc.) while the rainmaker seems more like a box in itself, which there are better ones both in hardware and software imo.

i use the verbos together with clouds and erbe-verb, which form an awesome team

cool
natureclubcassettes
that does sound like an awesome team cool

similar to my processing chain, but I use the a-188-2 instead of the verbos... this may change though. I love the weird stereo image you can get when you hard pan output1>L and output2>R, with varying degrees of tap amounts and mix amounts. is it fair to assume that doing the same with the odd/even outs on the verbos would produce a similar, if less noisy, result?
Voggg
As I understand it, the pitch shift and reverb inputs are for audio (interrupting the normal from tap 8) and not for CV, is that correct?
If so, does patching audio there send it through just that effect and then into the feedback loop? So for instance you could take the output from tap 2 and 5 (or another voice) and send one through each effect?
Tumulishroomaroom
natureclubcassettes wrote:
that does sound like an awesome team cool
is it fair to assume that doing the same with the odd/even outs on the verbos would produce a similar, if less noisy, result?

I'm not certain but I feel like the preset outputs take all the taps at full volume for Odd/Even and descending/ascending for the other. It makes for superb stereo image but it bypasses the faders. However the classic mono mix output is still available so you can mix and match; it do this sometimes to have the velocity of the taps and the stereo image.

Voggg wrote:
As I understand it, the pitch shift and reverb inputs are for audio (interrupting the normal from tap 8) and not for CV, is that correct?
If so, does patching audio there send it through just that effect and then into the feedback loop? So for instance you could take the output from tap 2 and 5 (or another voice) and send one through each effect?

No, if you plug anything into inputs 2/3 it bypasses the FX. The pitch shift and reverb only work with the normalled taps.
Tumulishroomaroom
Also I thought that might be of interest to some since the Verbos website doesn't even have a page for the Delay :


(click for full res)

These are the cards that come with the delay, the "manual" if you wish.
jmax313
BrokenBo wrote:
i had the rainmaker and currently own the verbos delay. rainmaker on paper has more features but in practice i much preferred the sound and interface of the verbos delay.

verbos interface is very inviting for tweaking and experimenting and the feedback possibilities are great. to me this module is very "modular" and interacts quite well with other modules in my system (random sources, filters, oscillators for fm etc.) while the rainmaker seems more like a box in itself, which there are better ones both in hardware and software imo.

i use the verbos together with clouds and erbe-verb, which form an awesome team

cool


Tumulishroomaroom wrote:
damase has answered very well already but I also have both and use both all the time. They are very complimentary and each du stuff than the other isn't capable of. The Multi Delay Processor has more of a sound of its own, and has the great advantage of being very tactile; it's not a set and forget module, you play it. The pitchifting and reverb lead you to great washes of ambiance and are very useful for sound design. Like Mark Verbos says himself it's not an end of chain delay, it's a delay that's an integral part of your voice.


Voggg wrote:
I absolutely love the sounds coming out of it in every demo and track I've heard so far. And the followers. That said, I'm puzzled by the lack of a clock input / tap tempo. There's a tension that hasn't been fully resolved yet between the very analog Verbos design ethos and the feature sets / options users expect from a digital module.
Based on sound characteristics, I would choose this over Rainmaker; based on features and utility I'd choose the latter. Fortunately I already have a few great delay modules, so I'll be content listening to what other people come up with in this thread.


damase wrote:

I have both and i love both.
Completely justified for having both. They sound very different, they are very different in usage/patching, and they have very different end results.

I use the multidelay in a system that had a lot of analog patching, fm intertwining and feedback modulations
The rainmaker i use as a sound design and performance tool, its more of a system in itself



Thank you all for the replies! I'm glad to hear the comparison and that they both can compliment each other. It will eventually be nice to have both delays that do completely different things and used in extremely different ways. It's peanut butter jelly time!

Until then, I'll keep listening to those sound videos hyper
kingcons
Tumulishroomaroom wrote:
Also I thought that might be of interest to some since the Verbos website doesn't even have a page for the Delay :


(click for full res)

These are the cards that come with the delay, the "manual" if you wish.


Ah, bless you! I've been wondering why I couldn't find heads or tails of the manual anywhere and had the same question about the extra audio inputs.
Voggg
Now that I fully understand the design, I have to say I'm disappointed. The narrow clock range and lack of clock input is one thing (and it seems that has to do with the original Buchla design). I understand this is not meant to replicate "vanilla" delay or reverb. But the total lack of modulation inputs apart from clock is frustrating. No depth modulation on the pitch or reverb, and only a manual mix *if* you're only using one input. No alternate signal configuration or feedback routes. That just doesn't make sense to me. You have a big mixer for the taps but no way to automate or scan through them as you have in other Verbos modules. The envelope followers are a great idea, but you can do something similar with any other delay module and Maths (and in any case, self-patching is limited to using them on the clock).
Mark has said he comes from the engineer's school of thinking, that delays and other effects should be added after the fact, and that this delay should be playable in a modular environment. I understand and appreciate the Verbos design philosophy, and I certainly wouldn't want him to break from it. But why make a digital module that is so limited in terms of how you can use it? The sound is fantastic from what I've heard, but without the ability to modulate and find new territory, there is a chance that it gets stale after a while.
BrokenBo
have to agree on the mixer section. i dont know why you cannot automate that like you can on the harmonic oscillator, bark and scan & pan...would have loved to have that feature.
Tumulishroomaroom
I still find quite strange to be disappointed in a module without having tried it, by now we know that there's much more to modular than pure specs...

Would have been nice to have VC over Pitch/Verb but there isn't so...
mritenburg
Voggg wrote:
No alternate signal configuration or feedback routes.


There are two feedback routes. The pitch shifter input and reverb input both allow for patching feedback.

Voggg wrote:
That just doesn't make sense to me. You have a big mixer for the taps but no way to automate or scan through them as you have in other Verbos modules.


The taps are already scanned sequentially according to their placement in time relative to the input. You can speed-up or slow-down the scan rate with a CV. You have the ability with the sliders to mix their collective outputs any way you like. And, you can take individual outputs from any tap and run them through the sequential switch on the Verbos Sequence Selector if you want more variation.

Voggg wrote:
But why make a digital module that is so limited in terms of how you can use it? The sound is fantastic from what I've heard, but without the ability to modulate and find new territory, there is a chance that it gets stale after a while.


It is a time-based processor, not a pitch-based or frequency-based processor. From a time-based perspective it offers a wealth of modulation possibilities.

I think the design of the Multi-Delay Processor assumes that you are using it in the context of a fuller system with the expectation that you have some support and utility modules to help make the most of it.
The Junglechrist
Hey there everyone ! We have a new Patch from Scratch online that use the Multi Delay with short delay time and pitch shift on percussive sound :

BrokenBo
wow that serge res eq seems to be awesome. should i get one ? grin. great video!
luketeaford
Great video as always!
The Junglechrist
BrokenBo wrote:
wow that serge res eq seems to be awesome. should i get one ? grin. great video!


Yes it is quite a beast of a module ! I just had it for a week as I finaly didn't had the money to buy it to my friend who wante to get rid of it, but it was a fun week !
Voggg
Everyone has their own design philosophy; I'm certainly not suggesting that more CV ins is automatically better module design. My main point is that a in a large and fairly expensive effect (given all the other delay modules available), having just one CV option is a bold choice, especially in the context of other Verbos modules.
I don't mean to sound argumentative. I'm really happy that people are enjoying this module and as I said it sounds fantastic. I was looking for any excuse to buy it, and I appreciate your perspective that it's up to the user to put modules to creative use. I'll respond to your points just for the sake of clarification:
1. What I don't understand is making the secondary / feedback inputs replace the effects. I would want to mix the feedback and still have access to the effects.
2. My idea was "scanning" the volume of each tap with CV, as the VHO and Bark can do. For example, send an lfo to emphasize the second tap, then the third tap, and so on. In practice I'm not sure whether this would be useful or not, but some kind of CV control of mix or decay would be nice and is pretty standard in delay modules.
All that said, I really enjoy hearing what everyone is doing with this module. I just don't think it's for me.

mritenburg wrote:
Voggg wrote:
No alternate signal configuration or feedback routes.


There are two feedback routes. The pitch shifter input and reverb input both allow for patching feedback.

Voggg wrote:
That just doesn't make sense to me. You have a big mixer for the taps but no way to automate or scan through them as you have in other Verbos modules.


The taps are already scanned sequentially according to their placement in time relative to the input. You can speed-up or slow-down the scan rate with a CV. You have the ability with the sliders to mix their collective outputs any way you like. And, you can take individual outputs from any tap and run them through the sequential switch on the Verbos Sequence Selector if you want more variation.

Voggg wrote:
But why make a digital module that is so limited in terms of how you can use it? The sound is fantastic from what I've heard, but without the ability to modulate and find new territory, there is a chance that it gets stale after a while.


It is a time-based processor, not a pitch-based or frequency-based processor. From a time-based perspective it offers a wealth of modulation possibilities.

I think the design of the Multi-Delay Processor assumes that you are using it in the context of a fuller system with the expectation that you have some support and utility modules to help make the most of it.
The Junglechrist
Hey there guys ! I made this little patch where I use the Multi-Delay as a sort of fill generator for the drum beat (from a Tr-606) and it is very fun to use this way :

https://www.instagram.com/p/BqjkBc7FzTA/
yellowecho
How's everyone using the followers?

Very interested in picking up this module but need ideas to use it to its full potential.
The Junglechrist
yellowecho wrote:
How's everyone using the followers?

Very interested in picking up this module but need ideas to use it to its full potential.


I use them to change the delay time of the unit itself for some rythmic wobbles, very fun. You can also just send a trigger in the input of the delay and will turn it into a short enveloppe delayed 8 times that you can patch anywhere (in the individual harmonics of the Harmonic Oscillator for exemple).
It a very fun feature of the delay, there is MANY use to it, the best is to experiment with it.
iheartmodular
verbos mdp is gorgeous

exactly sounds i like thumbs up
Tumulishroomaroom
You can use the enveloppe followers like you'd use any enveloppe to modulate whichever parameter you fancy. Self patching is indeed great, other fun uses include the timbre controls of your oscillators, filters. Their use differs depending on the source material you feed the delay since you always get enveloppes relative to the delay input.
Tumulishroomaroom
Here's a new track where I used the Multi delay Processor to thicken drones and mess with samples from two TG One. You can easily hear the pitch shifting feedback; I also used an individual output which I re-routed through the reverb input via a ALM EQ. I tweaked the three levels as well as the faders live to play with the sound.

Other notable elements: Lyra 8, DFAM, Loquelic Iteritas Percido, Rainmaker, Fracture, Chimera, Hats & Cymbals & Bass Drum from Erica...


[s]https://soundcloud.com/tumulishoomaroom/1989-damage[/s]


Also; does anyone here have a Bark Filter ? If so how's the interaction between the two ? I'm guessing fantastic smile It's a hefty module but I might go for it sooner than later...
The Junglechrist
Here is the Multi-Delay being used almost only as a reverb at the end of this patch.

kingcons
I've been super enjoying my multi delay processor. It has made my "techno case" feel complete. Have a dumb instagram clip: https://www.instagram.com/p/BrdKpMOB9-w/

cool SlayerBadger!
yellowecho
kingcons wrote:
I've been super enjoying my multi delay processor. It has made my "techno case" feel complete. Have a dumb instagram clip: https://www.instagram.com/p/BrdKpMOB9-w/

cool SlayerBadger!


Sounds fire, dude! I'm officially GASing for it. Thanks for sharing This is fun!
Tumulishroomaroom
A little drone for the holiday :

https://www.instagram.com/p/Br23XoPhM2I/

With the fine company of the Bark Filter
Tumulishroomaroom
Some more insta snippet :

https://www.instagram.com/p/BsnuU9nhHce/
With short DFAM clicks going into the Multi Delay Processor
Tumulishroomaroom
Again, a little snippet with short, modulated clicks from WMD's Chimera going into the MDP. It's incredible to create texture. I'm also tapping one delay output which then goes into the Rainmaker for more texture out of barely anything.

https://www.instagram.com/p/BtQwj1sh6uE/
BrokenBo
do you guys have diff noise floor /background noise depending on delay time? i hear quite a bit of background noise on my module with some delay times, especially with the longest times.

i
stephentrask
BrokenBo wrote:
do you guys have diff noise floor /background noise depending on delay time? i hear quite a bit of background noise on my module with some delay times, especially with the longest times.

i


I think the longer delay times mixed with higher reverb amounts might contribute to this. I think the reverb might be more the culprit.
Tumulishroomaroom
Yeah it's a bit noisy on the longer delay times. I like the noise.
The Junglechrist
Hey there everyone ! Here is a new funky patch I like to use with the Multi-Delay processor. Feed it a short trigger and it will make ... nine delayed envelopes out of it ! Perfect pair with the Harmonic Oscillator :

damase
BrokenBo wrote:
do you guys have diff noise floor /background noise depending on delay time? i hear quite a bit of background noise on my module with some delay times, especially with the longest times.

i


i get noise floor at the very long and very short times. i think its a limitation of how the delay is designed. in the videos mark talks about the design and how he has been working this concept for many years with newer technology allowing for it to finally be made with an acceptable noise level. so, what makes this delay so cool is because of this design, making some noise level unavoidable. at first i was let down, but ive realized you can get some cool tone from the noise also. you just gotta work with it knowing how it reacts. If you cv input audio rate modulation the noise breaks up really nicely.

wanted to add, the noise level and tone is much more agreeable than a true analog bbd, thats a huge advantage of his design. rather than thinking “this is noisey for a digital delay”, its more like “this is super quiet for an analog delay”
damase
The Junglechrist cool patch, almost like a weird verbos arppegiator
The Junglechrist
damase wrote:
The Junglechrist cool patch, almost like a weird verbos arppegiator


Delayed Harmonic arpeggiator hahaha
Tumulishroomaroom
Just stumbled upon this sound :

https://www.instagram.com/p/Btx9T2-FWLZ/

The Multi delay Processor is really a one stop shop for Emptyset-ish sonics ! This is just the VCO 1 from the DFAM into a DPLPG opened by the init EG in Zadar. Plug the sub for this one, bass pressure is on.
Hansi026
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !
damase
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.
Hansi026
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine hmmm.....

it's not my first Verbos Module that make nonsens meh
damase
Hansi026 wrote:
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine hmmm.....

it's not my first Verbos Module that make nonsens meh


i cant speak to any inconsistencies about power situations, but it would be a good thing to test out for trouble shooting purposes, if there is no other conclusions about it then try customer service.

fwiw on my old power supply it would drop out audio on the clockwise end of the delay time and i remember the same thing “its been working fine the first couple weeks” kinda feeling
stephentrask
Hansi026 wrote:
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine hmmm.....

it's not my first Verbos Module that make nonsens meh


There was an issue with the very first batch of these that went out. Mine stopped making any sound when I turned the delay up past 4 o'clock. Your issue might be a different version of the same problem.
mritenburg
stephentrask wrote:
Hansi026 wrote:
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine :hmm:

it's not my first Verbos Module that make nonsens :roll:


There was an issue with the very first batch of these that went out. Mine stopped making any sound when I turned the delay up past 4 o'clock. Your issue might be a different version of the same problem.


Is there a fix for this?
stephentrask
mritenburg wrote:
stephentrask wrote:
Hansi026 wrote:
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine hmmm.....

it's not my first Verbos Module that make nonsens meh


There was an issue with the very first batch of these that went out. Mine stopped making any sound when I turned the delay up past 4 o'clock. Your issue might be a different version of the same problem.


Is there a fix for this?


There is a fix. Mine is fixed. If you write to them and send the video they will likely recognize the issue immediately. Mine, by the way, started off fine. Then one day, just like others here, I turned on my rack and it was malfunctioning, totally out of the blue.
mritenburg
stephentrask wrote:
mritenburg wrote:
stephentrask wrote:
Hansi026 wrote:
damase wrote:
Hansi026 wrote:
Hey guys, is this a normal behavior ?

delay time fully counterclockwise between x1 and the first dot nothing happend / no fx ?

and if the input mix is full open it sound stange if the delay time is between x1 and the first dot again :-(

https://vimeo.com/319922224

thank you for your help !


not normal behavior
i would try it on a different power supply.


.... nothing has change in my case ... for a couple of weeks, the module was fine :hmm:

it's not my first Verbos Module that make nonsens :roll:


There was an issue with the very first batch of these that went out. Mine stopped making any sound when I turned the delay up past 4 o'clock. Your issue might be a different version of the same problem.


Is there a fix for this?


There is a fix. Mine is fixed. If you write to them and send the video they will likely recognize the issue immediately. Mine, by the way, started off fine. Then one day, just like others here, I turned on my rack and it was malfunctioning, totally out of the blue.


Mine does this, but I've been using it creatively by balancing the cv input so it's right on the edge. It generates super interesting distortion artifacts.
Hansi026
i send it back to Schneidersladen.



thanks for the quick help !
stephentrask
mritenburg wrote:


Mine does this, but I've been using it creatively by balancing the cv input so it's right on the edge. It generates super interesting distortion artifacts.


You have an indomitable "feature not a bug" approach that even an actual bug won't deter.
mritenburg
stephentrask wrote:
mritenburg wrote:


Mine does this, but I've been using it creatively by balancing the cv input so it's right on the edge. It generates super interesting distortion artifacts.


You have an indomitable "feature not a bug" approach that even an actual bug won't deter.


I want my expensive Verbos modules to work as they are supposed to just like everyone here, but for this particular bug the benefits gained from exploiting it are almost worth not fixing it. I should ask VE if they can make the fix jumper selectable.
damase
stephentrask wrote:
mritenburg wrote:


Mine does this, but I've been using it creatively by balancing the cv input so it's right on the edge. It generates super interesting distortion artifacts.


You have an indomitable "feature not a bug" approach that even an actual bug won't deter.


thats awesome
i do remember thinking it sounded kind of cool, a warm distortion then the delay all disappearing at once. had drama to it
Illwiggle
Just got one of these last night. WHOA. Best Euro delay Ive come across so far, by far. I mean, I just plugged Rings in being triggered by an LFO & boom instant magic! Floom bloom ambient orchestral cascading gorgeousness....amazing how well in ‘integrates’ & doesnt necessarily sound like a delay effect. Superb module, well worth the price
Cortega
Illwiggle wrote:
Just got one of these last night. WHOA. Best Euro delay Ive come across so far, by far. I mean, I just plugged Rings in being triggered by an LFO & boom instant magic! Floom bloom ambient orchestral cascading gorgeousness....amazing how well in ‘integrates’ & doesnt necessarily sound like a delay effect. Superb module, well worth the price


Red Alert !...Red Alert !....You have broken the First Muffwiggler Rule !!
Speaking of instant Magic and not posting any Audio or Video File is a No Go.
You shall not go Wiggler Heaven until you post Audio of that Patch .
Mr. Green
slowpilgrim
Hansi026 wrote:
i send it back to Schneidersladen.



thanks for the quick help !


Mine cuts out between the 3 o'clock position and x2 (fully cw) i.e. the last quarter of the delay time. Is this normal behaviour? I noticed in the vid Mark did for Schneiders, he avoided this area so maybe that's just how it is.
Illwiggle
Cortega wrote:
Illwiggle wrote:
Just got one of these last night. WHOA. Best Euro delay Ive come across so far, by far. I mean, I just plugged Rings in being triggered by an LFO & boom instant magic! Floom bloom ambient orchestral cascading gorgeousness....amazing how well in ‘integrates’ & doesnt necessarily sound like a delay effect. Superb module, well worth the price


Red Alert !...Red Alert !....You have broken the First Muffwiggler Rule !!
Speaking of instant Magic and not posting any Audio or Video File is a No Go.
You shall not go Wiggler Heaven until you post Audio of that Patch .
Mr. Green


Hahaha..... I will post something from that session soon. I have yet to be set up on soundcloud..... it is a pretty awesome delay though, with the pitch shifting & cosmic reverb its an amaZing sound design piece
Cortega
Illwiggle wrote:
Cortega wrote:
Illwiggle wrote:
Just got one of these last night. WHOA. Best Euro delay Ive come across so far, by far. I mean, I just plugged Rings in being triggered by an LFO & boom instant magic! Floom bloom ambient orchestral cascading gorgeousness....amazing how well in ‘integrates’ & doesnt necessarily sound like a delay effect. Superb module, well worth the price


Red Alert !...Red Alert !....You have broken the First Muffwiggler Rule !!
Speaking of instant Magic and not posting any Audio or Video File is a No Go.
You shall not go Wiggler Heaven until you post Audio of that Patch .
Mr. Green


Hahaha..... I will post something from that session soon. I have yet to be set up on soundcloud..... it is a pretty awesome delay though, with the pitch shifting & cosmic reverb its an amaZing sound design piece

thumbs up
MUFF WIGGLER Forum Index -> Eurorack Modules  
Page 1 of 3
Powered by phpBB © phpBB Group