Stereo outs on Sidrazzi PCB

home of post-70s electronics

Moderators: Kent, bartlebooth

Post Reply
User avatar
corpusjonsey
Wiggling with Experience
Posts: 457
Joined: Mon Apr 15, 2013 10:46 am
Location: Fort Collins, CO

Stereo outs on Sidrazzi PCB

Post by corpusjonsey » Thu Dec 13, 2018 11:35 am

I'm going to build a Sidrazzi soon and while going over the board I don't see where to hook up the stereo output jack. Will I need to build a mixer or what? Thanks in advance for your help!

User avatar
Repeater
Phantom Powers
Posts: 767
Joined: Sun Oct 03, 2010 3:14 am
Location: Rochester, NY

Post by Repeater » Thu Dec 13, 2018 5:38 pm

Stereo mixer is built in. The two audio outputs are denoted by a little semi-circle around a plated hole. There's one just above the "P" capacitor and the other is just below the "U" capacitor. It seems like a variation of the symbol for audio outputs on a lot of the paper circuits, but is easy to overlook.

Image

User avatar
corpusjonsey
Wiggling with Experience
Posts: 457
Joined: Mon Apr 15, 2013 10:46 am
Location: Fort Collins, CO

Post by corpusjonsey » Thu Dec 13, 2018 5:43 pm

Thanks so much! I was curious about those and now it makes sense.

Post Reply

Return to “Ciat-Lonbarde”